Panasonic PT-56DLX25 Service Manual page 30

PT-56DLX75 / PT-61DLX75
4. 1) Release the AC Cord from the slot of the Rear Jack Holder.
2) Remove the Rear Jack Holder by removing the 7 Screws (402) then releasing the 3 Locking Tabs.
3) Remove the Top Shield Metal by removing the 8 Screws (402).
4) Remove Screw (479), and pull off both the Rear Jack Earth Plate and the Rear Jack C.B.A. (BtoB Connector P3501 is
disconnected.)
402
Clampers
402
402
Replacement Note for Rear Jack C.B.A.:
These parts will be necessary when replacing. Set aside, keep, and re-use.
- Rear Jack Earth Plate
402
402
402
Panel Spring
Top Shield Metal
Rear Jack C.B.A.
P3501
Fig. D4-3
402
479
402
Locking Tab
Rear Jack
Earth Plate
Locking
Tabs
28
Rear Jack Holder
402
Slot
AC Cord