Setting The Iso Sensitivity - Ricoh GR III Operating Manual

Setting the ISO Sensitivity

1
Press c (u).
2
Use r to change the value.
Values from ISO 100 to ISO 102400 can be set.
Press h to reset to ISO AUTO. Press h again
to reset to the value set last.
3
Memo ---------------------------------------------------------------------------------------------------------
• This function can be set to [ADJ Mode Setting] of the D2 menu. (p.121)
• Images taken with a higher sensitivity may appear grainy.
• Depending on the ISO sensitivity setting, the setting of [D-Range Correction] in the A6 menu is
disabled. (p.84)
• ISO sensitivity can also be set in [ISO Setting] of the A2
menu. The detailed settings of ISO AUTO can be set from
the menu.
ISO Auto Upper Limit
ISO Auto Lower Limit
Minimum Shutter Speed
• When the setting of [ISO Button] has been changed in [Fn Button Setting] (p.123) of the D2
menu, set in the A2 menu.
64
Downloaded from
Select the highest ISO sensitivity for ISO AUTO.
Select the lowest ISO sensitivity for ISO AUTO.
Select the shutter speed to increase the sensitivity for ISO AUTO.
ManualsNet.com
ISO Setting
ISO Setting
ISO Auto Upper Limit
ISO Auto Lower Limit
Minimum Shutter Speed
search engine
ISO AUTO
1/400 F5.6 400
AUTO
6400
100
1/40
100