Table of Contents
Advertisement
1
Select [Image Control] in the A6/B6 menu, and press d.
The [Image Control] screen appears.
2
Use ab to select an image.
Proceed to Step 6 if you do not need to
change the parameters.
3
3
Press h.
The detailed setting screen appears.
4
Use abcd to change the setting.
Available parameters vary depending on the
selected image.
5
Press e.
The screen in Step 2 reappears.
6
Press e.
7
Press f.
The icon appears on the shooting screen.
Caution -------------------------------------------------------------------------------------------------------
• The [Image Control] setting is not applied to RAW images. It can be set when [RAW Development] of
the C2 menu is performed. (p.100)
Memo ---------------------------------------------------------------------------------------------------------
• This function can be registered to [ADJ Mode Setting] or [Fn Button Setting] in the D2 menu.
(p.121, p.123)
88
Downloaded from
ManualsNet.com
Image Control
Standard
Standard
Saturation
search engine
Cancel
Cancel
1/400
F5.6
400
OK
0
0
0
0
0
0
0
OK
100
Advertisement
Table of Contents
