Table of Contents
Advertisement
Problem
The flash does not
illuminate the subject.
Images are too bright. Flash output is not appropriate. Adjust the flash output, move away
Images are too dark.
The colors of images
are unnatural.
The monitor brightness
changes during
autofocus.
Electronic level indica-
tors are not displayed.
The image is not level
although level indicator
showed that the
camera was level.
Downloaded from
Cause
The subject is dark.
Flash output is not appropriate.
The monitor brightness is not
appropriate.
The monitor brightness is not
appropriate.
The exposure compensation is
set to a negative value.
The camera is unable to adjust
white balance for shooting con-
ditions using auto white balance.
Ambient lighting is poor or dif-
fers from that used for autofocus.
Electronic level indicators are
hidden.
The camera was moving during
shooting because you were on
a moving object or due to other
causes.
The subject is not level.
ManualsNet.com
Adjust the flash output.
from the subject, or use a different
light source.
Adjust the brightness of the monitor
in the E3 menu.
Adjust the brightness of the monitor
in the E3 menu.
Change the exposure compensa-
tion value.
Include a white object with the
subject or select the settings other
than [Auto White Balance] for [White
Balance].
This is normal and does not indicate
a malfunction.
Check the [Shooting Info. Display]
setting in the D3 menu.
Do not move the camera during
shooting.
Check the subject.
search engine
Solution
p.66
p.66
p.128
p.128
p.53
p.69
p.126
Page
—
7
—
—
143
Advertisement
Table of Contents
