Bluetooth Transmission - HoMedics HL858DM Instruction Manual

Bluetooth Transmission

To activate Bluetooth function, please make sure your Bluetooth-enabled
device have downloaded APP, and follow pairing instruction.
There are 2 ways to process Bluetooth Transmission if Bluetooth function is
ON:
Measurement Completed:
1. After measurement completed, the device activates Bluetooth
function automatically and the Bluetooth symbol will begin flashing
on the screen.
2. HL858DM can pair up with Bluetooth-enabled device. To
transmit measuring results to other Bluetooth-enabled.
Press button for one time:
Under Standby Mode,
1. Press button into the Bluetooth mode, the Bluetooth Symbol
will begin flashing on the screen.
2. While transmitting the reading to your Bluetooth-enabled Device,
HL858DMetooth Symbol will remain steady on the screen.
3. HL858DM can pair up with Bluetooth-enabled device.
To transmit measuring results to other Bluetooth-enabled device,
please retry as mention above.
Fail connection:
If HL858DMannot be connected to paired Bluetooth-enabled device
over 45 seconds, LCD will display Error message "Et" and Bluetooth
will be turned off.
27
VER: A001 202203