Table of Contents
Advertisement
Measurement Procedure
measurement process is completed. The device will detect your
pulse and determine the blood pressure.
！
*Note
If the cuff does not stop inflating, remove the cuff at once.
To stop measurement, press
immediately after the button is pressed.
If there is any error during the measurement, such as movement or hard
pressure from the finger, the error message will be displayed as below:
E4 Try Again or E5 Try Again or E6 Try Again
* For details, please refer to Troubleshooting
E. After the monitor has determined your blood pressure and heart
rate, the cuff automatically deflates. Your systolic rate, diastolic
rate, pulse, BP Category Indicator Bar and Advanced IHB
Detection feature-related symbol are displayed with date and
time for 1 minute.
！
*Note
During the measurement for both blood pressure and Advanced IHB detection at
the same time, users may see the result from any one measurement from the
other one. Please do not move and wait for both measurement results displayed.
E-1.
If
Advanced
measurement as normal result, the LCD display will be as below:
E-2. If Advanced IHB positive is determined during the measurement,
the Advanced IHB positive symbol will be displayed on the LCD as
below:
F.
The blood pressure measurment is completed and without any
operation for 1 minutes, device automatically shuts off.
IHB
negative
25
button. The cuff will deflate
is
determined
VER: A001 202203
during
the
Advertisement
Table of Contents
