Ping Watch Dog; Reboot - TP-Link TL-WA701ND User Manual

3.7.6 Ping Watch Dog

The Ping Watch Dog is dedicated for continuous monitoring of the particular connection to remote
host using the Ping tool. It makes this device continuously ping a user defined IP address (it can
be the internet gateway for example). If it is unable to ping under the user defined constraints, this
device will automatically reboot.
Enable - Turn on/off Ping Watch Dog.
IP Address - The IP address of the target host where the Ping Watch Dog Utility is sending
ping packets.
Interval - Time internal between two ping packets which are sent out continuously.
Delay - Time delay before first ping packet is sent out when the device is restarted.
Fail Count - Upper limit of the ping packet the device can drop continuously. If this value is
overrun, the device will restart automatically.
Be sure to click the Submit button to make your settings in operation.

3.7.7 Reboot

This page (shown in Figure 3-37) allows you to reboot the device.
Click the Reboot button to reboot the device.
Some settings of the device will take effect only after rebooting, which include:
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide
Figure 3-36 Ping Watch Dog Utility
Figure 3-37 Reboot the device
55