HUSTLER X-ONE Operator's Manual page 52

SYMPTOMS PROBABLE CAUSES
Uneven cutting height The blade(s) are not sharp
A cutting blade(s) is/are
bent
The deck is not level
An anti-scalp wheel is not
set correctly
The underside of the deck
is dirty
Tires improperly inflated
A blade spindle is bent
Flex Forks
REV E
SUGGESTED
REMEDIES
Sharpen the blades
Install new cutting blade(s)
Level the deck per the Deck
leveling and height
adjustment section of the
General Service Manual
Adjust the height of the
anti-scalp wheel
Clean the underside of the
deck
Adjust air pressure to 8–12
psi (55–83 KPa)
Contact your dealer
After initial break-in period,
®
are installed
level the deck per the Deck
Leveling section of the
General Service Manual.
5-2 606839