Service And Maintenance - Festool OF 2200 EB-F Original Instructions Manual

► If necessary, use a screwdriver on the two
guidance jaws [16-2] to adjust the play be­
tween the guide rail adapter and the guide
rail.
► Move the router along the guide rods until
there is the required distance between the
cutter and the guide rail. Ensure that there
is a safety distance X of (see figure [16])
7/32" (5 mm) between the front edge of the
guide rail and the cutter, or the groove.
► Close the rotary knob [16-1].
► Open the rotary knob [16-10].
► Precisely adjust distance X by turning the
adjusting wheel [16-7]. Hold the adjusting
wheel [16-7] to separately turn the
scale [16-8] and set it to zero.
► Close the rotary knob [16-10].
16
16-1
16-2
9.6 Changing the base runner
Festool offers special base runners (available
as an accessory) for different applications.
► Lay the power tool on its side on a stable
base.
► Release the lever [14-4].
► Remove the base runner [14-1].
► Release the lever [14-4] again.
► Insert the base runner with the tabs [14-2]
into the router table.
16-10
16-9
16-8
16-7
16-6
16-5
16-4
16-3
► Push the base runner into the router table
until it engages.
When using the base runner for the first
time: Remove the protective film.

10 Service and maintenance

WARNING
Any maintenance or repair work that re­
quires opening of the motor or gear housing
should only be carried out by an authorised
Customer Service Centre (name supplied by
your dealer)!
► Maintenance or repair work carried out by
an unauthorised person can lead to the
wrong connection of the power cord or oth­
er components, which in turn can lead to
accidents with serious consequences.
WARNING
To prevent accidents, always remove the
plug from the power supply socket before
carrying out any changes or maintenance
work on the tool!
► Do not use compressed air to clean the
electrical tool! Do not try to clean parts in­
side the tool in this way, as you could let
foreign objects in through the openings of
the tool housing.
CAUTION
Certain cleaning agents and solvents are
harmful to plastic parts.
► Some of these include, but are not limited
to: Gasoline, Acetone, Methyl Ethyl Ketone
(MEK), Carbonyl Chloride, cleaning solu­
tions containing Chlorine, Ammonia, and
household cleaners containing Ammonia.
Customer service and repairs must
only be carried out by the manufac­
turer or service workshops. Find the
nearest address at:
www.festoolusa.com/service
Always use original Festool spare
EKAT
4
parts. Order no. at:
www.festoolusa.com/service
5
3
2
1
The tool is equipped with special self-discon­
necting carbon brushes. If they wear out, the
power supply is disconnected automatically and
the tool stops.
English
17