WARNING indicator Warning sound
—
Problem
The fan does not rotate
when started.
WARNING indicator Warning sound
—
Problem
Restoration is required
because the media was
removed while the
camcorder was in
recording standby
mode of Clip
Continuous Rec (see
page 84).
WARNING indicator Warning sound
—
Problem
Power to the external
device connector was
removed because
overcurrent was
detected on the
connector. (Other
operations are not
affected.)
1) (B) for the card in slot B
2) B for a HDD connected to slot B
—
Operation in the recorder
module
—
—
Operation in the recorder
module
Recording continues.
—
Operation in the recorder
module
Recording continues.
Tally/REC
Battery remaining
—
—
Action to take
Avoid use under high temperature conditions.
Power the camcorder off and contact a Sony
service representative.
Tally/REC
Battery remaining
—
—
Action to take
Insert again the media which was removed and
restore it (see page 72).
Tally/REC
Battery remaining
—
—
Action to take
Power the camcorder off and remove the Wi-Fi
adapter or USB flash drive that is connected to
the external device connector.
Operation Warnings
183