Sony PMW-500 Operation Manual page 157

Assignable switch setting Function
Backlight
EVF Mode
BRT Disp
Histogram
Lens Info
Zoom Tele/Wide
Zoom Wide/Tele
Manual Focus Assist
Focus Mag
Zebra
Lens RET
Return Video
Shot Mark1
Shot Mark2
OK Mark
Clip Flag OK
Clip Flag NG
Clip Flag Keep
Color Temp SW 3200K
Color Temp SW 4300K
Color Temp SW 5600K
Color Temp SW 6300K
Turn the backlight function in auto iris mode on or off.
Switch the viewfinder screen between B&W (On) and
color (Off).
Turn the display of the brightness level on or off.
Turn the histogram display on or off.
Switch the depth of field indication between off,
displayed in meters, and displayed in feet.
When a lens that supports serial communication is
installed, assign the Zoom Tele function to
ASSIGNABLE 4, and assign the Zoom Wide function to
ASSIGNABLE 5 (displayed only when <4> and <5> are
set).
When a lens that supports serial communication is
installed, assign the Zoom Wide function to
ASSIGNABLE 4, and assign the Zoom Tele function to
ASSIGNABLE 5 (displayed only when <4> and <5> are
set).
Turn the manual focus assist function on or off.
Turn the focus magnification function on or off.
Turn zebra display on or off.
Display return video signals when the optional CBK-
HD02 is installed and a camera extension unit is
connected.
When a camera extension unit is not connected, function
as follows.
During recording or playback: Write a shot mark.
In the other states: Conduct a recording review
(if playback is allowed).
Display return video signals when the optional CBK-
HD02 is installed and a camera extension unit is
connected.
Write Shot Mark1.
Write Shot Mark2.
Add or delete an OK mark.
Add/Clear an OK mark to/from the clip being recorded
or played.
Add/Clear an NG mark to/from the clip being recorded
or played.
Add/Clear a KP mark to/from the clip being recorded or
played.
Adjust the white balance with a 3200K preset value.
Adjust the white balance with a 4300K preset value.
Adjust the white balance with a 5600K preset value.
Adjust the white balance with a 6300K preset value.
State when camcorder
is next powered on
Setting retained
Setting retained
Setting retained
Setting retained
Setting retained
—
—
Setting retained
Setting not retained
Setting not retained
—
—
—
—
—
Setting not retained
Setting not retained
Setting not retained
Setting retained
Setting retained
Setting retained
Setting retained
Assigning Functions to Assignable Switches
157