Sony PMW-500 Operation Manual page 145

MAINTENANCE
Menu items Sub-item
Iris Window
Auto Iris2
Makes settings related
to auto iris.
Iris Window Ind
Iris Level
Iris APL Ratio
Iris Var Width
Iris Var Height
Iris Var H Position
Iris Var V Position
Iris Speed
Clip High Light
Genlock
Genlock
Makes settings related
H Phase(HD)
to genlock.
H Phase(SD)
Reference
Settings
1/2/3/4/5/6/Var
On/Off
–99 to ±0 to +99
–99 to ±0 to +99
40 to 500 to 999
70 to 500 to 999
–479 to 0 to +479
–464 to 0 to +464
–99 to ±0 to +99
On/Off
On/Off
–999 to ±0 to +999
–99 to ±0 to +99
Internal/Genlock
Description
Selects the type of iris detection
window.
Var: Variable
Turns on or off the function that
displays a frame marker for the auto
iris detection window.
Adjusts the level of the auto iris
target value.
Adjusts the mix ratio of auto iris
detection peak value and average
value (available when OPERATION
>TLCS >Mode is set to [Standard]).
Adjusts the width of the detection
window when the setting of Iris
Window is VAR.
Adjusts the height of the detection
window when the setting of Iris
Window is VAR.
Specifies the horizontal position of
the detection window when the
setting of Iris Window is VAR.
Specifies the vertical position of the
detection window when the setting
of Iris Window is VAR.
Specifies the control speed (speed of
reaction to changes in the video).
(Larger values specify quicker
reaction times.)
Turns on or off the function that
disregards highlights and forces a
flatter reaction to high luminance.
Turns the genlock function on or off.
Specifies the H phase of HD output
when genlock is enabled.
Specifies the H phase of SD output
when genlock is enabled.
Displays the type of reference signal
used by the camcorder.
Menu List
145