Sony PMW-500 Operation Manual page 158

Assignable switch setting Function
Electrical CC
CC5600K
Clip Continuous Rec
Digital Extender
158
Assigning Functions to Assignable Switches
Function that switches the electrical CC filter (3200K/
4300K/5600K/6300K) applied to white balance
adjustment values.
Each press of the switch or button switches in the order
3200Kt4300Kt5600Kt6300K.
These can also be applied from a menu (apply with
Electrical CC<A><B><C><D>).
Note
This function is not available when Maintenance >White
Filter >ND Filter C.Temp in the setup menu is set to On.
If you set ND Filter C.Temp to On after assigning the
function, the assignable switch ceases to function.
Apply a 5600K electrical CC filter to white balance
adjustment values.
Turn the Clip Continuous Rec mode on or off.
Turn the screen magnification function on or off when
the optional CBK-HD02 SDI/COMPOSITE Input and 50
Pin Interface is installed.
State when camcorder
is next powered on
Setting retained
Setting retained
Setting not retained
Setting not retained