ECS C7VCM2 Manual page 44

38
Soft-Off by PWRBTN (Instant Off)
Under ACPI (Advanced Configuration and Power management Interface) you can create a
software power down. In a software power down, the system can be resumed by Wake Up
Alarms. This item lets you install a software power down that is controlled by the power
button on your system. If the item is set to Instant-Off, then the power button causes a
software power down. If the item is set to Delay 4 Sec. then you have to hold the power
button down for four seconds to cause a software power down.
Run VGABIOS if S3 Resume (Auto)
This item allows the system to initialize the VGA BIOS from S3 (Suspend to RAM) sleep
state.
Ac Loss Auto Restart (Off)
This item enables your computer to automatically restart or return to its last operating
status.
IRQ/Event Activity Detect (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
x
x
x
: Move
F5:Previous Values
PS2KB Wakeup Select (Hot Key)
This item enables you to select any key, hot key or power key to allow keyboard
activity to awaken the system.
PS2KB Wakeup from S3 (Disabled)
This item enables or disables you to allow keyboard activity to awaken the system from S3
mode.
• Power Button Lock (Enabled): If you enabled this item, the system can
automatically resume by pressing power key on the keyboard, or typing in the
password.You must use an ATX power supply in order to use this feature.
PS2MS Wakeup from S3 (Disabled)
This item enables or disables you to allow mouse activity to awaken the system from S3
mode.
Phoenix-AwardBIOS CMOS Setup Utility
IRQ/Event Activity Detect
PS2KB Wakeup Select
PS2KB Wakeup from S3
Power Button Lock
PS2MS Wakeup from S3
Resume By USB(S3)
VGA
LPT & COM
HDD & FDD
PCI Master
Resume By PCI PME
Resume By RING
RTC Alarm Resume
Date (of Month)
Resume Time (hh:mm:ss)
IRQs Activity Monitoring
Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
F6:Fail-Safe Defaults
Using BIOS
[Hot Key]
Item Help
[Disabled]
Enabled
Menu Level
[Disabled]
[Disabled]
When Select Password,
[OFF]
Please press ENTER
[LPT/COM]
key to change Password
[ON]
Max 8 numbers.
[OFF]
[Enabled]
[Disabled]
[Disabled]
0
0: 0: 0
[Press Enter]
F7:Optimized Defaults