1. Manuals
  2. Brands
  3. ECS Manuals
  4. Motherboard
  5. C19-A SLI
  6. Manual

ECS C19-A SLI Manual

Hide thumbs
Table of Contents
  • Table of Contents

  • Chapter 1 Introducing the Motherboard
    • Introduction
    • Feature
    • Motherboard Components

  • Chapter 2 Installing the Motherboard
    • Safety Precautions
    • Choosing a Computer Case
    • Installing the Motherboard in a Case
    • Checking Jumper Settings
      • Setting Jumpers
      • Checking Jumper Settings
      • Jumper Settings
    • Connecting Case Components
      • Front Panel Connector
    • Installing Hardware
      • Installing the Processor
      • Installing Memory Modules
      • Installing a Hard Disk Drive/CD-ROM/SATA Hard Drive
      • Installing a Floppy Diskette Drive
      • Installing Add-On Cards
      • Connecting Optional Devices
    • Connecting I/O Devices

  • Chapter 3 Using BIOS
    • About the Setup Utility
      • The Standard Configuration
      • Entering the Setup Utility
      • Updating the BIOS
    • Using BIOS
      • Standard CMOS Features
      • Advanced BIOS Features
      • Advanced Chipset Features
      • Integrated Peripherals
      • Power Management Setup
      • P N P/PCI Configurations
      • PC Health Status
      • Load Fail-Safe Defaults
      • Load Optinized Defaults
      • Set Superviser/User Password
      • Save & Exit Setup
      • Exit Without Saving

  • Chapter 4 Using the Motherboard Software
    • About the Software CD-ROM
    • Auto-Installing under Windows 2000/XP
      • Running Setup
    • Manual Installation
    • Utility Software Reference

  • Chapter 5 Installing SLI-Ready Graphics Cards
    • 5.1 Overview
    • 5.3 Installing the Device Driver
    • 5.4 Enabling the Multi-GPU Feature in Windows

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 67

Quick Links

Advertisement

Table of Contents
loading

Related Manuals for ECS C19-A SLI

Summary of Contents for ECS C19-A SLI

  • Page 3 Preface Copyright This publication, including all photographs, illustrations and software, is protected under international copyright laws, with all rights reserved. Neither this manual, nor any of the material contained herein, may be reproduced without written consent of the author. Version 1.0c Disclaimer The information in this document is subject to change without notice.
  • Page 4 Declaration of Conformity This device complies with part 15 of the FCC rules. Operation is subject to the following conditions: • This device may not cause harmful interference, and • This device must accept any interference received, including interference that may cause undesired operation Canadian Department of Communications This class B digital apparatus meets all requirements of the Canadian Interference-causing Equipment Regulations.

  • Page 5: Table Of Contents

    T T T T T ABLE OF CONTENTS ABLE OF CONTENTS ABLE OF CONTENTS ABLE OF CONTENTS ABLE OF CONTENTS Preface Chapter 1 Introducing the Motherboard Introduction....................1 Feature......................2 Motherboard Components................4 Chapter 2 7 7 7 7 7 Installing the Motherboard Safety Precautions..................7 Choosing a Computer Case...............7 Installing the Motherboard in a Case............7...
  • Page 6 Integrated Peripherals..............35 Power Management Setup............40 P n P/PCI Configurations ............42 PC Health Status .................43 Load Fail-Safe Defaults...............44 Load Optinized Defaults..............44 Set Superviser/User Password............44 Save & Exit Setup.................45 Exit Without Saving..............45 Chapter 4 47 47 47 47 47 Using the Motherboard Software About the Software CD-ROM..............47 Auto-installing under Windows 2000/XP..........47 Running Setup................48...

  • Page 7: Introducing The Motherboard

    Chapter 1 Introducing the Motherboard Introduction Thank you for choosing the C19-A SLI motherboard. This motherboard is a high perfor- mance, enhanced function motherboard designed to support the LGA775 socket Intel Pentium 4/Celeron D/Pentium D/Pentium 4 Extreme Edition/Pentium processor Extreme Edition processors for high-end business or personal desktop markets.

  • Page 8: Feature

    Feature Processor This motherboard uses an LGA775 type of Pentium 4/Celeron D/Pentium D/Pentium 4 Extreme Edition/Pentium processor Extreme Edition that carries the following features: • Accommodates Intel Pentium 4/Celeron D/Pentium D processors • Supports a system bus (FSB) of 1066/800/533 MHz •...
  • Page 9 Audio(Optional) The onboard Audio controller provides the following features: • Compliant with AC’97 v2.3 specification with 6-channel support. • 16-bit stereo full-duplex CODEC with 48 KHz sampling rate • Support double sampling rate (96 KHz) of DVD audio playback • Direct Sound 3D compatible •...

  • Page 10: Motherboard Components

    Motherboard Components Introducing the Motherboard...
  • Page 11 Table of Motherboard Components LABEL COMPONENT LGA775 socket for Pentium 4/Celeron D/ 1 CPU Socket Pentium D/Pentium 4 Extreme Edition/Pentium processor Extreme Edition CPUs 2 CPU_FAN CPU cooling fan connector 3 DIMM1~4 240-pin DDR2 SDRAM slots 4 FDD Floppy diskette drive connector 5 ATX1 Standard 24-pin ATX power connector 6 IDE2...
  • Page 12 Memo Introducing the Motherboard...

  • Page 13: Installing The Motherboard

    Chapter 2 Installing the Motherboard Safety Precautions • Follow these safety precautions when installing the motherboard • Wear a grounding strap attached to a grounded device to avoid damage from static electricity • Discharge static electricity by touching the metal case of a safely grounded object before working on the motherboard •...

  • Page 14: Checking Jumper Settings

    Do not over-tighten the screws as this can stress the motherboard. Checking Jumper Settings This section explains how to set jumpers for correct configuration of the motherboard. Setting Jumpers Use the motherboard jumpers to set system configuration options. Jumpers with more than one pin are numbered.

  • Page 15: Checking Jumper Settings

    Checking Jumper Settings The following illustration shows the location of the motherboard jumpers. Pin 1 is labeled. Jumper Settings Type Jumper Description Setting (default) 1-2: NORMAL CLR_CMOS 2-3: CLR_CMOS CLR_CMOS 3-pin CLEAR CMOS Before clearing the CMOS, make sure to turn off the system.

  • Page 16: Connecting Case Components

    Connecting Case Components After you have installed the motherboard into a case, you can begin con- necting the motherboard components. Refer to the following: Connect the CPU cooling fan cable to CPU_FAN. Connect the case fan connector to CAS_FAN1. Connect the northbridge fan connector to NB_FAN. Connect the connector for graphics interface to ATX4P1.
  • Page 17 CPU_FAN: CPU Cooling FAN Power Connector Signal Name Function System Ground Power +12V +12V Sense Sensor CPU FAN control Users please note that the fan connector supports the CPU cooling fan of 1.1A~2.2A (26.4W max.) at +12V. CAS_FAN1 :CASE FAN Power Connector Signal Name Function System Ground...

  • Page 18: Front Panel Connector

    ATX4P1: Auxiliary Power Connector for Graphics Interface Signal Name Make sure to connect a 4-pin ATX power cable to ATX4P1; otherwise, the system will be un- stable. +12V SPK1: Internal speaker Signal Name Signal Front Panel Connector The front panel connector (PANEL1) provides a standard set of switch and LED connec- tors commonly found on ATX or micro-ATX cases.

  • Page 19: Installing Hardware

    Power Switch Supporting the power on/off function requires connecting pins 6 and 8 to a momentary- contact switch that is normally open. The switch should maintain contact for at least 50 ms to signal the power supply to switch on or off. The time requirement is due to internal de- bounce circuitry.
  • Page 20 CPU Installation Procedure The following illustration shows CPU installation components. Read and follow the instructions shown on the sticker on the CPU cap. B. Unload the cap · Use thumb & forefinger to hold the lifting tab of the cap. ·...

  • Page 21: Installing Memory Modules

    Installing Memory Modules This motherboard accommodates four memory modules. It can support four 240-pin DDR2 667/533 DDR2 SDRAM. The total memory capacity is 16 GB. DDR2 SDRAM memory module table Memory module Memory Bus DDR2 533 266MHz DDR2 667 333MHz You must install at least one module in any of the four slots.
  • Page 22 Table A: DDR2 QVL (Qualified Vender List) The following DDR2 memory modules have been tested and qualified for use with this motherboard. Type Size Vendor Module Name A-DATA M2OHY2F3G3110A1B0Z Kingston KVR533D2N4 256MB Infineon HYS64T32000HU-3.7-A Ramaxel RML 1040M28D5F-533 DDR2 533 SAMSUNG M378T3253FGO-CD5 AENEON AET660UD00-370A98X...

  • Page 23: Installing A Hard Disk Drive/Cd-Rom/Sata Hard Drive

    Installing a Hard Dish Drive/CD-ROM/SATA Hard Drive This section describes how to install IDE devices such as a hard disk drive and a CD-ROM drive About IDE Devices Your motherboard has two IDE channel interfaces(IDE1 & IDE2). Two IDE ribbon cables supporting four IDE devices is bundled with the motherboard.

  • Page 24: Installing A Floppy Diskette Drive

    Refer to the illustration below for proper installation: Attach either cable end to the connector on the motherboard. Attach the other cable end to the SATA hard drive. Attach the SATA power cable to the SATA hard drive and connect the other end to the power supply.

  • Page 25: Installing Add-On Cards

    Installing Add-on Cards The slots on this motherboard are designed to hold expansion cards and connect them to the system bus. Expansion slots are a means of adding or enhancing the motherboard’s features and capabilities. With these efficient facilities, you can increase the motherboard’s capabili- ties by adding hardware that performs tasks that are not part of the basic system.
  • Page 26 Follow these instructions to install add-on cards: 1. Open the chassis and then remove the slot bracket from the case where you will be installing the expansion cards. 2. Install your graphics card in the proper slot by pressing the card firmly into the slot.

  • Page 27: Connecting Optional Devices

    Connecting Optional Devices Refer to the following for information on connecting the motherboard’s optional devices: AUDIO1: Front Panel Audio header This header allows the user to install auxiliary front-oriented microphone and line-out ports for easier access. Pin Signal Name Signal Name Signal Name Function Function...
  • Page 28 USB3/4: Front Panel USB headers The motherboard has four USB ports installed on the rear edge I/O port array. Additionally, there are two USB headers onboard. Use the auxiliary USB headers to connect the front- mounted ports to the motherboard. Signal Name Function USBPWR...

  • Page 29: Connecting I/O Devices

    Connecting I/O Devices The backplane of the motherboard has the following I/O ports: PS2 Mouse Use the upper PS/2 port to connect a PS/2 pointing device. PS2 Keyboard Use the lower PS/2 port to connect a PS/2 keyboard. Parallel Port (LPT2) Use LPT2 to connect printers or other parallel communications devices.
  • Page 30 Memo Installing the Motherboard...

  • Page 31: Using Bios

    Chapter 3 Using BIOS About the Setup Utility The computer uses the latest Award BIOS with support for Windows Plug and Play. The CMOS chip on the motherboard contains the ROM setup instructions for configuring the motherboard BIOS. The BIOS (Basic Input and Output System) Setup Utility displays the system’s configura- tion status and provides you with options to set system parameters.
  • Page 32 Press DEL to enter SETUP Press the delete key to accesse the BIOS Setup Utility. Phoenix-AwardBIOS CMOS Setup Utility Standard CMOS Features Load Fail-Safe Defaults Advanced BIOS Features Load Optimized Defaults Advanced Chipset Features Set Supervisor Password Integrated Peripherals Set User Password Power Management Setup Save &...

  • Page 33: Updating The Bios

    Updating the BIOS You can download and install updated BIOS for this motherboard from the manufacturer’s Web site. New BIOS provides support for new peripherals, improvements in performance, or fixes for known bugs. Install new BIOS as follows: If your motherboard has a BIOS protection jumper, change the setting to allow BIOS flashing.

  • Page 34: Standard Cmos Features

    Standard CMOS Features This option displays basic information about your system. Phoenix - AwardBIOS CMOS Setup Utility Standard CMOS Features Wed, Jan 1 2003 Date (mm:dd:yy) Item Help 5 : 29 : 17 Time (hh:mm:ss) IDE Channel 0 Master [ None] IDE Channel 0 Slave [ None] Menu Level...
  • Page 35 IDE HDD Auto-Detection Press <Enter> while this item is highlighted to prompt the Setup Utility to automatically detect and configure an IDE device on the IDE channel. If you are setting up a new hard disk drive that supports LBA mode, more than one line will appear in the parameter box.

  • Page 36: Advanced Bios Features

    Advanced BIOS Features This option defines advanced information about your system. Phoenix -AwardBIOS CMOS Setup Utility Advanced BIOS Features CPU Features [Press Enter] Hard Disk Boot Priority [Press Enter] Item Help CPU L1 & L2 Cache [Enabled] Hyper-Threading Technology [Enabled] Menu Level Quick Power On Self Test [Enabled]...
  • Page 37 Execute Disable Bit (Enabled) This item allows the processor to classify areas in memory by where application code can execute and where it cannot. when a malicious worm attempts to insert code in the buffer, the processor disables code execution, preventing damage or worm propagation. Replacing older computers with Execute Disable Bit-enabled systems can halt worm attacks, reducing the need for virus related repair.
  • Page 38 Boot Other Device (Enabled) When enabled, the system searches all other possible locations for operating system if it fails to find one in the devices specified under the First, Second, and Third boot devices. Swap Floppy Drive (Disabled) If you have two floppy diskette drives in your system, this item allows you to swap the assigned drive letters so that drive A becomes drive B, and drive B becomes drive A.

  • Page 39: Advanced Chipset Features

    Advanced Chipset Features These items define critical timing parameters of the motherboard. You should leave the items on this page at their default values unless you are very familiar with the technical specifications of your system hardware. If you change the values incorrectly, you may introduce fatal errors or recurring instability into your system.
  • Page 40 PCIE Frequency (MHz) (100.0000) This item determines the frequency of PCIE. CPU Clock Ratio (19 x) This item enables you to set the CPU clock. The CPU clock ratio times the CPU Host/PCI Clock should equal the core speed of the installed processor. (For unlock Ratio CPU only) CPU Core Unlock (Disabled) This item enables user to lock or unlock the CPU Core.

  • Page 41: Integrated Peripherals

    CPU Spread Spectrum (Center Spread) This item, when enabled, can significantly reduce the EMI (Electromagnetic Interference) generated by the CPU. PCIE Spread Spectrum (Down Spread) This item, when enabled, can significantly reduce the EMI (Electromagnetic Interference) generated by the PCIE. SATA Spread Spectrum (Disabled) This item, when enabled, can significantly reduce the EMI (Electromagnetic Interference) generated by the SATA.
  • Page 42 IDE Function Setup (Press Enter) Scroll to this item and press <Enter> to view the following screen: Phoenix-AwardBIOS CMOS Setup Utility IDE Function Setup Item Help OnChip IDE Channel0 [Enabled] Primary Master [Auto] Primary Slave [Auto] Menu Level Primary Master UDMA [Auto] Primary Slave...
  • Page 43 RAID Config (Press Enter) Scroll to this item and press <Enter> to view the following screen: Phoenix-AwardBIOS CMOS Setup Utility RAID Config Item Help RAID Enable [Disabled] SATA 1 Primary RAID [Disabled] SATA 1 Secondary RAID [Disabled] Menu Level SATA 2 Primary RAID [Disabled] SATA 2 Secondary RAID...
  • Page 44 USB Mouse Support (Enabled) Enable this item if you plan to use a mouse connected through the USB port in a legacy operating system (such as DOS) that does not support Plug and Play. Azalia Audio (Enabled) This item allows you to control the Onboard Azalia audio. Disable this item if you are going to install a PCI audio add-on card.
  • Page 45 UART Mode Select (IrDA) This field is available if the Onboard Serial Port 2 field is set to any option but Disabled.. UART Mode Select enables you to select the infrared communication protocol-Normal (default), IrDA, or ASKIR. UR2 Duplex Mode (Half) This field is available when UART 2 Mode is set to either ASKIR or IrDA.

  • Page 46: Power Management Setup

    Power Management Setup This option lets you control system power management. The system has various power- saving modes including powering down the hard disk, turning off the video, suspending to RAM, and software power down that allows the system to be automatically resumed by certain events.
  • Page 47 Soft-Off by PWR-PBTN (Instant-Off) Under ACPI (Advanced Configuration and Power management Interface) you can create a software power down. In a software power down, the system can be resumed by Wake Up Alarms. This item lets you install a software power down that is controlled by the power button on your system.

  • Page 48: P N P/Pci Configurations

    PC Health Status On motherboards that support hardware monitoring, this item lets you monitor the param- eters for critical voltages, critical temperatures, and fan speeds. Phoenix - AwardBIOS CMOS Setup Utility PC Health Status Item Help [Disabled] Smart Fan Control FAN1 START PWM VALUE FAN1 START Temp Menu Level...
  • Page 49 PnP/ PCI Configurations This section describes configuring the PCI bus system. PCI (Peripheral Component Inter- connect) is a system, which allows I/O devices to operate at speeds nearing CPU’s when they communicate with own special components. All the options describes in this section are important and technical and it is strongly recommended that only experienced users should make any changes to the default settings.

  • Page 50: Load Fail-Safe Defaults

    Load Fail-Safe Defaults This option opens a dialog box that lets you install fail-safe defaults for all appropriate items in the Setup Utility: Press <Y> and then <Enter> to install the defaults. Press <N> and then <Enter> to not install the defaults. The fail-safe defaults place no great demands on the system and are generally stable.

  • Page 51: Save & Exit Setup

    Save & Exit Setup Highlight this item and press <Enter> to save the changes that you have made in the Setup Utility and exit the Setup Utility. When the Save and Exit dialog box appears, press <Y> to save and exit, or press <N> to return to the main menu: Exit Without Saving Highlight this item and press <Enter>...
  • Page 52 Memo...

  • Page 53: Using The Motherboard Software

    Chapter 4 Using the Motherboard Software About the Software CD-ROM The support software CD-ROM that is included in the motherboard package contains all the drivers and utility programs needed to properly run the bundled products. Below you can find a brief description of each software program, and the location for your motherboard version.

  • Page 54: Running Setup

    Setup Tab Setup Click the Setup button to run the software installation program. Select from the menu which software you want to install. Browse CD The Browse CD button is the standard Windows command that allows you to open Windows Explorer and show the contents of the support Before installing the software from Windows Explorer, look for a file named README.TXT, INSTALL.TXT or something similar.
  • Page 55 Click Next. The following screen appears: Check the box next to the items you want to install. The default options are recommended. Click Next run the Installation Wizard. An item installation screen appears: Follow the instructions on the screen to install the items. Drivers and software are automatically installed in sequence.

  • Page 56: Manual Installation

    Manual Installation Insert the CD in the CD-ROM drive and locate the PATH.DOC file in the root directory. This file contains the information needed to locate the drivers for your motherboard. Look for the chipset and motherboard model; then browse to the directory and path to begin installing the drivers.

  • Page 57: Installing Sli-Ready Graphics Cards

    1. You should have two identical SLI-ready graphics cards that are NVIDIA certified. 2. Visit the ECS website (www.ecs.com.tw) for a list of qualified SLI- ready graphics cards for this motherboard. 3. Make sure that your graphics card driver supports the NVIDIA technology.
  • Page 58 2. Insert one graphics card into PCIE2 slot. Make sure that the card is properly seated on the slot. 3. Insert the second graphics card into PCIE4 slot. Make sure that the card is properly seated on the slot. If required, connect an auxiliary power source to the PCI Express graphics cards. 4.
  • Page 59 5. Connect a 4-pin ATX power cable to the auxiliary 4-pin power connector labeled ATX4P1 on this motherboard. ATX4P1 Make sure to connect a 4-pin ATX power cable to the ATX4P1; otherwise, the system will be unstable. 6. Remove any of the two bracket covers between the graphics cards. Bracket slot 7.

  • Page 60: 5.3 Installing The Device Driver

    8. Connect a VGA cable or a DVI-I cable to the graphics card installed on the PCIE2 PCI Express slot. 5.3 Installing the device driver Refer to the documentation that came with your graphics card package to install the device drivers. Make sure that your PCI Express graphics card driver supports the NVIDIA SLI technology.
  • Page 61 3. From the nView Desktop Manager window, select the Desktop Management tab. 4. Click Properties to display the Display Properties dialog box. 5. From the Display Properties dialog box, select the Settings tab then click Advanced. 6. Select the NVIDIA GeForce tab. Installing SLI-ready Graphics Cards...
  • Page 62 7. Click on the slider to display the following screen, and then select the SLI multi- GPU item. Slider 8. Click the Enable SLI multi-GPU check box. 9. Click OK when done. Installing SLI-ready Graphics Cards...
  • Page 63 Caractéristiques Processeur Cette carte mère utilise un type LGA775 de Pentium 4/Celeron D/Pentium D/Pentium 4 Ex- treme Edition/ Pentium processeur Extreme Edition présentant les fonctionnalités suivantes : • Peut recevoir les processeurs Intel Pentium 4/Celeron D/Pentium D • Support un bus système (FSB) de 1066/800/533 MHz •...
  • Page 64 Audio (Optionnel) Le contrôleur Audio interne offre les caractéristiques suivantes : • Conforme aux spécifications AC’97 2.3 prenant en charge 6 canaux • CODEC full-duplex 16 bits avec vitesse d’échantillonnage de 48MHz • Prend en charge la vitesse d’échantillonnage double (96KHz) de la lecture audio DVD •...
  • Page 65 Features Prozessor Das Motherboard verwendet einen LGA775 Typ Pentium 4/Celeron D/Pentium D/Pentium 4 Extreme Edition/Pentium Prozessor Extreme Edition mit den folgenden Eigenschaften: • Nimmt Intel Pentium 4/Celeron D/Pentium D Prozessoren auf • Unterstützt einen Systembus (FSB) mit 1066/800/533 MHz. • Unterstützt CPU mit “Hyper-Threading”-Technologie.
  • Page 66 Audio(optional) Der onboard Audiocontroller bietet die folgenden Leistungsmerkmale: • Entspricht AC’97 2.3 Spezifikationen unterstützt 6-Kanal • 16-Bit Stereo-Vollduplex CODEC mit einer Samplingrate von 48MHz • Unterstützt bei der DVD-Audiowiedergabe die doppelte Samplingrate (96KHz) • Kompatibel mit Direct Sound 3D • Entspricht Intel High Definition Audio, unterstützt 8-Kanal DACs mit 95dB S/N Ratio •...
  • Page 67 Caratteristiche Processore La scheda madre utilizza un tipo LGA775 di Pentium 4/Celeron D/Pentium D/Pentium 4 Extreme Edition/Pentium processore Extreme Edition che offre le seguenti caratteristiche: • Compatibile con processori Intel Pentium 4/Celeron D/Pentium D • Supporta un bus di sistema (FSB) fino a 1066/800/533 Mhz •...
  • Page 68 Audio(Opzionale) Il controller Audio integrato sulla scheda offre le seguenti caratteristiche: • Conforme alle specifiche AC’97 2.3 con supporto a 6 canali • CODEC full-duplex stereo a 16 bit con velocità di campionamento di 48 • Supporto di velocità di campionamento doppia (96 KHz) per la riproduzione audio di DVD •...
  • Page 69 Características Procesador Esta placa principal usa un tipo LGA775 de Pentium 4/Celeron D/Pentium D/Pentium 4 Extreme Edition/Pentium procesador Extreme Edition que lleva las sigtes. características: • Acomoda procesadores Intel Pentium 4/Celeron D/Pentium D • Soporta un sistema de bus (FSB) de 1066/800/533 MHz •...
  • Page 70 Audio El controlador Audio abordo provee las sigtes. características: Conformidad con las especificaciones AC’97 2.3 que soporta 6 canales • • CODEC de full-duplex estéreo de 16-bit con índice de muestreo de 48MHz • Soporta doble índice de muestreo (96KHz) de reproducción de audio DVD •...
  • Page 71 Características Processador Esta motherboard usa um tipo de Pentium 4/Celeron D/Pentium D/Pentium 4 Extreme Edition/ Pentium processador Extreme Edition LGA775 que possui as seguintes características: • Acomoda processadores Intel Pentium 4/Celeron D/Pentium D • Suporta um bus sistema (FSB) de 1066/800/533 MHz •...
  • Page 72 Áudio O controlador Áudio onboard fornece as seguintes características: • Cumpre com as especificações AC’97 2.3 suportando 6 canais • CODEC duplex total Estéreo de 16 bits com taxa de amostragem de 48MHz • Suporta taxa de amostragem dupla (96KHz) de reprodução áudio DVD •...
  • Page 73 機能 プロセッサ このマザーボードにはLGA775 タイプのPentium 4/Celeron D/Pentium D/Pentium 4 Extreme Edition/Pentium プロセッサ Extreme Edition を取り付け可能で、次の 特徴があります： • Intel Pentium 4/Celeron D/Pentium D プロセッサが搭載可能 • 1066/800/533MHzのシステムバス(FSB)をサポート • “ハイパースレッド技術対応のCPUを取り付け可能 ハイパースレッド（HT） 技術というのは、オペレーションシステムに2つのプロセッサが存在すると認 識させることで、実際には2つのスレッドを1つのプロセッサで同時に執行させ、平行利用を可能とす る技術です。 チップセット C19XE Northbridge (NB)と MCP51 Southbridge (SB)チップセットは、実証された信 頼性と性能を持つ革新的で拡張性のあるアーキテクチャに基づいています。 C19XE (NB) •...
  • Page 74 オーディオ(オプション) オンボードのオーディオコントローラでは、次ぎの機能が提供されます：: • 6チャネルをサポートするAC’97 v2.3仕様に準拠 • 48MHzサンプリングレートの16ビットステレオ全二重CODEC • DVD音声再生のダブルサンプリングレート(96KHz)に対応 • Direct Sound 3D に対応 • Intel High Definition Audio規格に準拠することで、95dB S/N率の8チャ ネル DACをサポート • すべての DACでは、 44.1/48/96/192 KHz のサンプリングレートが可能 • 24/20/16-bit S/PDIF出力では、192/96/48/44.1 KHz サンプリングが可 能 • 電源サポート：デジタルの場合は 3.3V、アナログの場合は3.3V-5.25V • すべてのアナログ端子は、ステレオ入出力re-tasking機能によるアナログ plug & playが可能 •...
  • Page 75 특징 프로세서 본 마더보드는 팬티엄 4/셀러론 D/팬티엄 D/팬티엄 4 Extreme Edition/ 팬티엄 프로세 서 Extreme Edition의 LGA775 을 사용하며 다음과 같은 특성을 지닙니다: • 인텔 팬티엄 4/셀러론 D /팬티엄 D 프로세서 사용 • 1066/800/533 MHz시스템 버스(FSB) 지원 • ”Hyper-Threading”기술 CPU 지원 ”Hyper-Threading”기술은...
  • Page 76 오디오(옵션) 내장된 오디오 컨트롤러의 특징: • AC'97 2.3 사양 호환, 6 채널 지원 • 48MHz 샘플링 속도를 지닌 16 비트 스테레오 풀-듀플렉스 코덱 • DVD 오디오 재생 시 더블 샘플링 속도 (96KHz) 지원 • Direct Sound 3D 호환 • 95dB S/N 비율로 8 채널 DAC를 지원하는 HD 오디오 부합 •...
  • Page 77 功能 處理器 本主機板適用於LGA775 型Pentium 4 /Celeron D/Pentium D/Pentium 4 Extreme 版/ Pentium 處理器 Extreme 版且具有如下功能： • 可搭配Intel Pentium 4/Celeron D/Pentium D 處理器 • 支援高達 1066/800/533MHz之系統匯流排(FSB) • 支援使用超執行緒(Hyper-Threading)技術之CPU 利用“超執行緒(HT)”技術，可使作業系統在相當於裝上了兩具處理器的狀態下運 作：利用一個”實體”處理器模擬出兩個獨立的”邏輯”處理器，同時執行兩個工作 緒。 晶片組 C19XE北橋(NB)及MCP51南橋(SB)晶片組在研發設計上採用了創新且具擴充性之架構， 具備優良的可靠性及性能。 • HyperTransport x8/x8 對下一代MCP提供高達800 MHz之上 C19XE (NB) 下行連接...
  • Page 78 音效(選項) 內建之音訊控制器具有如下功能： • 相容於AC'97 2.3 規格並且支援6聲道 • 16位元立體聲全雙工CODEC，取樣率48MHz • 支援DVD音訊播放的雙取樣率(96KHz) • Direct Sound 3D 相容 • 相容於Intel High Definition Audio規格，可支援95dB S/N 比的 8聲道 • 提供完整之 DAC功能，支援44.1/48/96/192 KHz 取樣率 • 具24/20/16位元 S/PDIF輸出，支援192/96/48/44.1 KHz s取樣率 • 電源支援：3.3V(數位時)，3.3V-5.25V(類比時) • 所有類比插頭均具類比隨插即用的立體環場音訊輸入及輸出的重組態(re- tasking)功能 • 符合Microsoft WHQL/WLP 2.x 音訊規格 •...
  • Page 79 功能 处理器 此主板使用 LGA775 型 Pentium 4/Celeron D/Pentium D/Pentium 4 Extreme Edition/ Pentium 处理器 Extreme Edition CPU，具备以下特点： • 支持 Intel Pentium 4/Celeron D/Pentium D 处理器 • 支持 1066/800/533 MHz 系统总线 (FSB) • 支持“多线程”技术 CPU “多线程”技术可以让操作系统认为自己连接了两个处理器，允许两个线程并行运行， 每个线程位于同一处理器中的单独“逻辑”处理器中。 芯片组 C19XE北桥 (NB) 和 MCP51 南桥 (SB) 芯片组是基于一种新型的、可扩展的架构，能 提供已经证明的可靠性和高性能。...
  • Page 80 音频 板上集成的音频控制器提供以下功能： • 兼容 AC’97 v2.3 规格并支持 6 通道 • 具有 48MHz 采样速率的 16 位全双工 CODEC（编解码器） • 支持 DVD 音频播放的双采样速率 (96KHz) • 符合 Direct Sound 3D 规格 • 符合高精度音频规格，支持 8 通道 DAC，95dB 信噪比 • 所有 DAC 都支持 44.1/48/96/192 KHz 采样率 •...
  • Page 81 Характеристики Процессор Плата построена на базе процессора Pentium 4/Celeron D/Pentium D/Pentium4 Extreme Edition/Pentium процессор Extreme Edition LGA775 и обладает следующими характеристиками: • Размещает процессоры Intel Pentium 4/Celeron D/Pentium D • Поддерживает системные шины (FSB) с частотой 1066/800/533MHz • Поддерживает технологию CPU “Hyper-Threading” Технология...
  • Page 82 Аудио (Опционально) Интегрированный контроллер аудио обладает следующими характеристиками: • Совместимость со спецификацией AC’97 2.3 поддержка 6-канальных • 16-битный стерео CODEC (полный дуплекс) с частотой сэмплирования 48 МГц • Поддержка двойной скорости сэмплирования аудиовыхода DVD (96 кГц) • Совместимость с Direct Sound 3D •...
  • Page 83 Cechy Procesor Ta płyta główna zaopatrzona jest w procesor Pentium 4/Celeron D/Pentium D/Pentium 4 Extreme Edition /Pentium procesor Extreme Edition typu LGA775 i charakteryzuje się astępującymi cechami: • Obsługuje procesory Pentium 4/Celeron D/Pentium D firmy Intel • Obsługuje szynę systemowa (FSB) 1066/800/533MHz •...
  • Page 84 Audio (Opcjonalnie) Zintegrowany kontroler aodio zapewnia następujące możliwości: Zgodne ze specyfikacją AC’97 w wersji 2.3 obsługuje 6 kanałów • • 16 bitowe full-duplex CODEC z częstotliwością próbkowania 48MHz. • DVD audio playback obsługuje z podwójną częstotliwością próbkowania (96KHz) • Zgodny z Direct Sound 3D •...
  • Page 85 Vlastnosti Procesor Pentium 4 Extreme Tato základní deska je určena pro procesory Pentium 4 /Celeron D/Pentium D/ Edition/Pentium procesor Extreme Edition LGA775 a může nabídnout následující vlastnosti: • Určeno pro procesory Intel Pentium 4/Celeron D/Pentium D • Podporuje taktování systémové sběrnice (FSB) na frekvenci 1066/800/533 MHz •...
  • Page 86 Zvuk (volitelně) Vestavěný zvukový řadič rozhraní nabízí následující možnosti: • Splňuje požadavky standardu AC’97 2.3 podpora 6kanálového • 16bitový stereo plnì duplexní kodek se vzorkovací frekvencí 48 MHz • Podpora dvojnásobné vzorkovací frekvence (96 kHz) pro přehrávání DVD audio • Kompatibilita s Direct Sound 3D •...
  • Page 87 Caracteristici Procesorul Această placă de bază utilizează Pentium 4/Celeron D/Pentium D/Pentium 4 Extreme Edition/Pentium Extreme Edition de tipul LGA775, având următoarele caracteristici: • Funcţionează cu procesoare Intel Pentium 4/Celeron D/Pentium D • Funcţionează cu bus sistem (FSB) de 1066/800/533 MHz •...
  • Page 88 Audio (Opţional) controllerul audio onboard are următoarele caracteristici: • Compatibil cu specificaţia AC’97 2.3 suportând cu 6 canale • CODEC de 16 biţi stereo cu duplex complet şi viteză de eşantionare de 48 MHz • Suport pentru viteză dublă de eşantionare (96 kHz) pentru redare audio de pe DVD •...
  • Page 89 Спецификация Процесор Тази дънна платка използва Pentium 4/Celeron D/Pentium D/Pentium 4 Extreme Edition/ Pentium процесор Extreme Edition тип LGA775 със следните спецификации: • поддръжка на процесори Intel Pentium 4/Celeron D/Pentium D • поддръжка на системна шина със скорост 1066/800/533MHz • поддръжка...
  • Page 90 Аудио (Опция) Интегриран аудио контролер със следните спецификации: • Съвместимост със спецификациите на AC’97 Rev2.3 с поддръжка на 6- канални • 16-bit Stereo full-duplex CODEC с честота 48MHz • Поддръжка на двойна честота (96KHz) при възпроизвеждане на DVD audio • съвместимост...
  • Page 91 Jellemző Processzor Ez az alaplap LGA775 típusú Pentium 4/Celeron D/Pentium D/Pentium 4 Extreme Edition/ Pentium processzor Extreme Edition számára készült, és a következő jellemzőkkel bír: • Intel Pentium 4/Celeron D/Pentium D processzorokkal működik • 1066/800/533 MHz sebességű rendszerbuszt (FSB) támogat •...
  • Page 92 Audio (Opcionális) az onboard audio vezérlő a következő tulajdonságokkal rendelkezik: • Megfelel az AC’97 2.3-as specifikációnak 6 csatornás támogat. • 16 bites sztereo teljes duplex CODEC 48 MHz-es mintavételezési sebsséggel • Dupla mintavételezési arányú (96 kHz) DVD audio lejátszást teszt lehetővé...

Table of Contents