Table of Contents
Advertisement
Chapter 4: Graphing Features
68
2. Press A to select A DRAW, then press 2
to select 2 Line(.
The GRAPH window
reappears, with the
coordinate of the cursor
showing at the bottom of
the screen.
3. Move the flashing cursor on the screen to set the
starting point of the line.
Note:
The pixel increment can be set within the ZOOM menu.
While A ZOOM is selected, choose 7 Dec to set each
pixel size to "0.1
4. When the starting point is
set, press E to
anchor the location.
5. Move the cursor to
indicate the end point of
the line. When set, press
E to finalize the line
drawing.
6. You may draw as many
lines as you wish, by repeating the procedure from
4 to 5. When done drawing, press C to exit the
entry mode.
×
0.1", or 8 Int to set to "1
×
1".
Advertisement
Table of Contents
