Table of Contents
Advertisement
A SELECT
Displays the menu window to send the data specified as follows:
1 ALL
2 List
3 GraphEq
4 Program
5 G_Data
6 L_Data
7 Picture
8 Slide
9 A - Z, θ
B BACKUP
Send all the data stored in the calculator memory.
6. Select the item to send using { / } and pressing
E. A "✱" will be placed by the selected item.
7. Press @ h to send.
8. Transmission begins and a busy message will appear on the
displays of the both calculators.
• An data in the same memory locations in the receiver will be
automatically overwritten.
• Up to 10 files can be selected to send at once.
Example
If you wish to send the list L1, and L2 and graph equation Y2 to
the other calculator.
1. Prepare the receiving calculator by pressing @ p
D 2.
2. Press @ p D 1 on
the sending calculator.
The send menu will appear.
Displays a list of all the
stored files category by
category.
Displays a list of all the
stored list files.
Displays a list of all the stored graph equations.
Displays a list of all the stored program files.
Displays a list of all the stored graph data files.
Displays a list of all the stored list data files.
Displays a list of all the stored picture files.
Displays a list of all the user-made slide show data.
Displays a list of variables A to Z and θ.
Chapter 10: OPTION Menu
157
Advertisement
Table of Contents
