Table of Contents
Advertisement
Chapter 9: Programming Features
Starting pro-
gramming
Entering a
command
Entering the
alphabetical
input lock mode
Store the
program line by
line
140
4. Press E.
5. The cursor will move to the program input field just under the
title.
6. Press P.
The program menu will open.
The commands and other state-
ments are pre-installed in the
calculator.
Do not directly type in commands using the Alphabetical
mode, select each command from the program menu.
7. Select A 1.
8. Press P.
9. Select A 2.
The characters following a double
quotation mark can be manipulated
as text. No double quotation mark is required to close the text.
10. Press @ . to enter the
alphabetic lock mode.
11. Type HELLO WORLD.
Up to 160 alphanumeric characters
can be input per line. (Strings of up
to 158 characters maximum can be entered per line excluding
commands in this case, because each command is regarded
as a single character.)
When a line exceeds the width of the screen, the display will
shift to the left.
12. Press E.
The cursor will move to the next line and the data input will be
stored.
Store the program line by line by pressing E, { or
}.
13. Press @ q to exit the program edit screen.
Advertisement
Table of Contents
