Table of Contents
Advertisement
Figure 104. Installing the processor
Step 3.
Close the processor retainer, and push the handle to the locked position.
Figure 105. Closing the processor retainer
After you finish
1. Reinstall the heat sink. See
2. Install the air baffle. See
3. Install the top cover. See
4. Complete the parts replacement. See
Rack latches replacement
Use the following information to remove and install the rack latches.
Remove the rack latches
Use this information to remove the rack latches.
About this task
Attention:
"Install the heat sink" on page
"Install the air baffle" on page
"Install the top cover" on page
"Complete the parts replacement" on page
87.
64.
134.
.
Chapter 4
Hardware replacement procedures
140.
117
Advertisement
Table of Contents
