Table of Contents
Advertisement
Figure 53. Heat sink installation
Step 1.
Orient the heat sink with the screw holes on the processor plate. The captive screws on the heat
sink should align with the screw holes on the processor plate.
Step 2.
Tighten all the captive screws in the installation sequence shown on the heat-sink label.
After you finish
1. Install the air baffle. See "Install the air baffle" on page 30.
2. Install any parts that you have removed.
3. Complete the parts replacement. See "Complete the parts replacement" on page 110.
Rack latches replacement
Use this information to remove and install the rack latches.
Remove the rack latches
Use this information to remove the rack latches.
About this task
Attention: Read "Installation Guidelines" on page 27 to ensure that you work safely.
Procedure
80
HR630X V2 User Guide
Hide quick links:
Advertisement
Table of Contents
