Incoming Call Tone - Panasonic KX-TSC14W Operating Instructions Manual

" Special Features

Incoming Call Tone

While one line is being used, you may be informed by two tones if another
call has arrived on the other line. This incoming call tone can be
set/deleted by programming. Your phone comes from the factory set to
"2".
Make sure that the handset is on the cradle, the AC adaptor is
connected and the SP-PHONE/HEADSET indicator light is off.
(FUNCTION/EXIT)
1
Press
(_)
2
Press
"INCOMING TONE ?" is displayed.
(fl)
3 Press
≥The current setting is displayed.
ON: The incoming call tone will be
heard as long as the other line
rings.
The incoming call tone will only be
≥2:
heard 2 times (factory preset).
≥OFF: The incoming call tone will not be
heard.
(_)
4 Press
setting.
(fl)
5
Press
≥A beep sounds.
≥The display will return to step 2. To return
to the standby mode, press
(FUNCTION/EXIT) or wait for 60 seconds.
≥You can exit the programming mode any time by pressing (FUNCTION/EXIT).
≥If the ringer volume is set to "OFF", the incoming call tone will not be heard even
if the incoming call tone is set to "ON" or "2".
42
.
(^)
or repeatedly until
OK/EDIT.
(^)
or to select the desired
OK/EDIT (SAVE key).
11 / 24
AM
11:50
SAVE AUTO# ?
11 / 24
11:50 AM
INCOMING TONE ?
11 / 24
AM
11:50
ON
1=SAVE