" Settings
Selecting the Ringer Volume
You can select the ringer volume for each line by programming. Set to
HIGH or LOW. When set to OFF, the selected line(s) will not ring. Both
lines are preset to HIGH.
(FUNCTION/EXIT)
1
Press
(_)
2
Press
"RINGER VOLUME ?" is displayed.
(fl)
3
Press
(_)
4
Press
line, "LINE1" or "LINE2".
(fl)
5
Press
(_)
6
Press
volume.
≥The selected volume rings.
≥To turn the ringer OFF,
press and hold (_) until 2 beeps
sound.
(fl)
7
Press
≥The display will return to step 2. To program the other line, start from
step 3.
≥To return to the standby mode, press (FUNCTION/EXIT) or wait for
60 seconds.
≥You can exit the programming mode any time by pressing (FUNCTION/EXIT).
≥You can adjust the ringer volume while the unit is ringing. Press (^) or (_) to
increase or decrease, or press and hold (_) to turn the ringer OFF.
18
.
(^)
or
repeatedly until
OK/EDIT.
(^)
or
to select the desired
OK/EDIT (NEXT key).
(^)
or
to select the desired
OK/EDIT.
11 / 24
AM
11:50
SAVE AUTO# ?
11 / 24
AM
11:50
RINGER VOLUME ?
11 / 24
AM
11:50
LINE1
11 / 24
AM
11:50
LINE2
11 / 24
AM
11:50
∑∑∑∑∑∑∑∑∑
AM
11 / 24
11:50
HIGH
∑∑∑∑∑∑∑∑∑
AM
11 / 24
11:50
LOW
∑∑∑∑∑
_ _ _ _
AM
11 / 24
11:50
OFF
RINGER OFF
1=NEXT
1=NEXT