Selecting The Line Mode - Panasonic KX-TSC14W Operating Instructions Manual

" Settings

Selecting the Line Mode

If a line is connected to a low voltage system such as a PBX, set to "B". If
not, the line indicator will not operate properly. Both lines are preset to
"A".
Make sure that the handset is on the cradle, the AC adaptor is
connected and the SP-PHONE/HEADSET indicator light is off.
(FUNCTION/EXIT)
1
Press
(_)
2
Press
LINE MODE ?" is displayed.
(fl)
3 Press
(_)
4 Press
line, "LINE1" or "LINE2".
(fl)
5 Press
(_)
6 Press
line mode.
(fl)
7 Press
≥A beep sounds.
≥The display will return to step 2. To
program the other line, start from step 3.
To return to the standby mode, press
(FUNCTION/EXIT) or wait for
60 seconds.
≥You can exit the programming mode any time by pressing (FUNCTION/EXIT).
14
.
(^)
or repeatedly until "SET
OK/EDIT.
(^)
or to select the desired
OK/EDIT (NEXT key).
(^)
or to select the desired
OK/EDIT (SAVE key).
11 / 24
AM
11:50
SAVE AUTO# ?
AM 11 / 24
11:50
SET LINE MODE ?
11 / 24
AM
11:50
LINE 1
LINE1
11 / 24
AM
11:50
LINE 1
LINE2
AM 11 / 24
11:50
LINE 1
A
1=NEXT
1=NEXT
1=SAVE