Flash Button - Panasonic KX-TSC14W Operating Instructions Manual

FLASH Button

(FLASH/CALLWAIT)
Pressing
host PBX such as transferring an extension call or accessing special
telephone services (optional) such as call waiting.
Selecting the flash time
The flash time depends on your telephone exchange or host PBX. You can
select the following flash times: "90, 100, 110, 250, 300, 400, 600, 700 ms
(milliseconds)". Your phone comes from the factory set to "700 ms".
Make sure that the handset is on the cradle, the AC adaptor is
connected and the SP-PHONE/HEADSET indicator light is off.
(FUNCTION/EXIT)
1 Press
(_)
2
Press or
"SET FLASH TIME ?" is displayed.
(fl)
3 Press OK/EDIT.
(_)
4 Press or
line, "LINE1" or "LINE2".
(fl)
5
Press OK/EDIT (NEXT key).
(_)
6 Press or
desired time is displayed.
(fl)
7 Press OK/EDIT (SAVE key) to set
the flash time.
≥A beep sounds.
≥The display will return to step 2. To program the other line, start from
step 3. To return to the standby mode, press (FUNCTION/EXIT) or wait for
60 seconds.
≥You can exit the programming mode any time by pressing (FUNCTION/EXIT).
≥If you are connected via a PBX, a longer flash time may be necessary to use
PBX functions (transferring a call, etc.). Consult your PBX installer for the correct
setting.
allows you to use special features of your
.
(^)
repeatedly until
(^)
to select the desired
(^)
repeatedly until the
11 / 24
AM
11:50
SAVE AUTO# ?
11 / 24
AM
11:50
SET FLASH TIME ?
AM 11 / 24
11:50
LINE1
1=NEXT
11 / 24
AM
11:50
LINE2
1=NEXT
11 / 24
AM
11:50
700MS
1=SAVE
"
39