Broadcast Transmission To Pre-Programmed Parties - Panasonic KX-FPC95 Operating Instructions Manual

Broadcast transmission to pre-programmed
parties!
This feature is useful for sending the same document often to selected parties whose fax
numbers are stored in the JOG DIAL directory. First program the parties (see below) then see
page 57 for transmission.
Before programming, make sure that the desired stations have been stored in the JOG
DIAL directory (p. 36).
Programming the stations in the broadcast memory
1 Press
DIRECTORY PROGRAM
2 Press SET .
3 Rotate
JOG DIAL
is displayed.
Example:
Press .
4 SET
Example:
To program other stations, repeat steps 4
and 5 (up to 20 stations).
Press after programming all of the
5 SET
desired stations.
6 Press
STOP
twice.
BROADCAST
PRESS1SET
DIR= [ 000 ]
until the desired name
John [ 000 ]
DIR=John [ 001 ]
111
REGISTERED
USE1JOG-DIAL1OR
PRESS1DIR.PROG.
to exit the program.
Sending Faxes
DIRECTORY PROGRAM
111
Note:
If you enter the wrong station, press
STOP
Confirm the stored numbers by printing a
broadcast programming list (p. 105).
Display
STOP
JOG DIAL
after step 4 to erase the station.
SET
55