One Time Broadcast Transmission - Panasonic KX-FPC95 Operating Instructions Manual

Sending Faxes
One time broadcast
This feature is useful for sending the same document to selected parties whose fax numbers are
stored in the JOG DIAL directory. If you only wish to send a document once, select the parties
for each transmission.
Before programming, make sure that the desired stations have been stored in the JOG
DIAL directory (p. 36).
Insert the document FACE DOWN.
1
If necessary, press
repeatedly to select the desired setting
(p. 49).
2 Rotate
JOG DIAL
displayed.
Display:
Press .
3 SET
4 Rotate
JOG DIAL
is displayed.
Example:
5 Press SET .
To program other stations, repeat steps 4
and 5 (up to 20 stations).
6 Press FAX START
the desired stations.
The document will be fed into the unit and
scanned into memory. The unit will then
transmit the data to each station, calling
each number sequentially.
After transmission, the stored document will
be erased automatically, and the unit will
automatically print a broadcast sending
report (p. 57).
To cancel the broadcast setting
1. Press STOP while the unit displays the following
message.
Display:
The display will show the following.
2. Press .
SET
54
transmission!
RESOLUTION
until the following is
<ONE1TIME1BROAD>
DIR= [ 000 ]
until the desired name
Bill [ 000 ]
DIR=Bill [ 001 ]
after programming all of
1BROADCASTING
SEND1CANCELED?
YES:SET/NO:STOP
Display
JOG DIAL
STOP
SET
FAX START
Note:
If you select the "FINE", "SUPER FINE" or
"HALF TONE" resolution, the number of
pages that the unit can transmit will decrease.
If one of the stations is busy or does not
answer, the station will be skipped. All
skipped stations will be redialed up to 2 times
after all of the other stations have been
called.
RESOLUTION