Multi-Unit User Operations - Panasonic KX-TCD540AL Operating Instructions Manual

Multi-Unit User Operations

Operating Additional Cordless Handsets
Additional KX-TCA151AZ or KX-TCA154AZ cordless handsets are available for
purchase separately. Up to 6 cordless handsets can be registered to a single base unit.
Using additional cordless handsets allows you to have an intercom call while
simultaneously conducting a call to an outside line.
KX-TCA151AZ does not have Voice Search feature.
Operating Additional Base Units
You can register and operate your cordless handset with up to 4 base units. Each base
unit forms 1 radio cell. If the individual bases are linked to the same telephone line then
you can extend the operating range of the system by positioning the bases so that the
cordless two radio cells overlap. If the cordless handset is set to auto base selection,
then in standby mode the cordless handset will automatically swap to the second base
if the range on the first base is exceeded. It is not possible to transfer calls between
bases (only between cordless handsets linked to the same base unit).
Radio Cell
Example:
Additional cordless
handsets (KX-TCA154AZ)
registered with 2 base units.
NOTE: Calls are disconnected when the cordless handset moves from one radio
cell to another.
2
1
3
4
5