Multi-Unit User Operations - Panasonic KX-TCD515NL Operating Instructions Manual

515NL_e.book Page 63 Tuesday, July 15, 2003 1:53 PM
Operating Additional Handsets
Additional KX-TCA151EX handsets are available for purchase separately. Up to 6
handsets can be registered to a single base unit. Using additional handsets allows you
to have an intercom call while simultaneously conducting a call to an outside line.
Operating Additional Base Units
You can register and operate your handset with up to 4 base units. Each base unit forms
1 radio cell. If the individual bases are linked to the same telephone line then you can
extend the operating range of the system by positioning the bases so that the two radio
cells overlap. If the handset is set to auto base selection, then in standby mode the
handset will automatically swap to the second base if the range on the first base is
exceeded. It is not possible to transfer calls between bases (only between handsets
linked to the same base unit).
Radio Cell
Example:
Additional handsets
(KX-TCA151EX) registered
with 2 base units.
NOTE: Calls are disconnected when the handset moves from one radio cell to
another.

Multi-Unit User Operations

2
1
3
4
5
63