Table of Contents
Advertisement
Handset Settings
Call Options
To exit the operation, press
1
Press JOYSTICK
(or move).
Call Bar ON/OFF
When this feature is set to ON, outgoing calls cannot be made. Intercom calls and calls
to numbers assigned as emergency numbers can be made (see Setting the
Emergency Call Numbers on page 68).
Follow steps 1 to 3 shown above, then:
4
Select "Call Bar".
• The factory preset is "Off".
• While the Call Bar mode is turned on, "
Setting the Direct Call Number
After a direct call number has been set and the feature has been turned on, you can dial
only the direct call number by pressing
emergency call cannot be made. However, incoming calls can be answered.
Follow steps 1 to 3 shown above, then:
4
Select "Direct Call
No.".
7
Select "Save".
• While the direct call mode is turned on, "
at any time.
2
Select "
Setting
Handset".
5
Enter 4-digit Handset
PIN.
(Factory Preset
0000)
" is displayed.
or
5
Enter Direct Call
Number.
(max. 24 digits)
8
Select "On".
" is displayed.
3
Select "Call
Option".
6
Select "On" or "Off".
. When this feature is ON,
6
Press JOYSTICK.
Go to step 4.
Advertisement
Table of Contents
