Table of Contents
Advertisement
Initial Programming
Date and time, your logo and fax number
Initial Programming
You should program the date and time, your logo and fax number. This information will be printed
on each page transmitted from your unit.
Setting the date and time
{<}{>}{+}{-}
1
{ { { {
} } } }
Press
MENU
.
2
{ { { { < < < < } } } }
{ { { { > > > > } } } }
Press
or
displayed.
3
{ { { {
} } } }
Press
SET
.
L
|
Cursor (
) will appear on the display.
4
Enter the correct month/day/year by
selecting 2 digits for each, using the dial
keypad.
Example: August 10, 2002
{ { { {
} } } } { { { {
} } } } { { { {
} } } } { { { {
Press
0
8
1
5
Enter the correct hour/minute by selecting 2
digits for each, using the dial keypad.
{ { { { * * * * } } } }
Press
to select "AM" or "PM".
Example: 10:15PM
{ { { {
} } } } { { { {
} } } } { { { {
1. Press
1
0
{ { { { * * * * } } } }
2. Press
until "PM" is displayed.
30
{MENU}
{SET}
SYSTEM SET UP
( )
PRESS NAVI.[
]
until the following is
SET DATE & TIME
PRESS SET
|
M:
0 1/D:01/Y:02
TIME: 12:00AM
} } } } { { { {
} } } } { { { {
} } } }
0
0
2
.
M:08/D:10/Y:02
|
TIME:
1 2:00AM
} } } } { { { {
} } } }
1
5
.
|
M:
0 8/D:10/Y:02
TIME: 10:15AM
|
M:
0 8/D:10/Y:02
TIME: 10:15PM
For Fax Advantage assistance, call 1-800-435-7329.
6
{ { { {
} } } }
Press
SET
.
L
The next feature will be displayed.
7
{ { { {
} } } }
Press
MENU
.
Note:
L
You can enter the number by pressing
{ { { { - - - - } } } }
or
in steps 4 and 5. In this case, press
{ { { { > > > > } } } }
to move the cursor.
L
The accuracy of the clock is approximately
±60 seconds a month.
To correct a mistake
{ { { { < < < < } } } }
{ { { { > > > > } } } }
Press
or
to move the cursor to the
incorrect number, and make the correction.
If you have registered with openLCR
service
The date and time will be automatically set. Do
not change the date and time setting yourself.
{ { { { + + + + } } } }
Hide quick links:
Advertisement
Table of Contents
