Receiving A Fax Manually - Panasonic KX-FHD331 Operating Instructions Manual

Receiving a fax manually

Receiving Faxes
Activating TEL mode
{RECEIVE MODE}
{STOP}
Set the fax machine to TEL mode by pressing
{ { { { } } } }
RECEIVE MODE until the following is
displayed.
TEL MODE
{FAX/START}
FAX
TEL
Receiving Faxes
How to receive calls
1
When the unit rings, lift the handset to
answer the call.
2
When document reception is required, a fax
calling tone (slow beep) is heard, or no
sound is heard, press
3
Replace the handset.
L
The unit will start fax reception.
Note:
L
If you do not answer the call within 10 rings,
the unit will temporarily switch to fax
reception. The other party can then send a
fax.
To stop receiving
{ { { { } } } }
Press STOP .
Extension telephone
If you use the fax machine with an extension
telephone, you can receive fax documents using
the extension telephone. You do not have to
{ { { { } } } }
press FAX/START on the fax machine.
Important:
L L L L
Use a touch tone telephone as the
extension telephone and enter the fax
activation code firmly.
1. When the extension telephone rings, lift the
handset of the extension telephone.
2. When document reception is required, a fax
calling tone (slow beep) is heard, or no sound
{ { { { * * * * } } } } { { { { # # # # } } } } { { { {
is heard, press
activation code) firmly.
3. Replace the handset.
L
The fax machine will start reception.
Note:
L
You can change the fax activation code in
feature #41 (page 62).
{ { { { } } } }
FAX/START .
CONNECTING.....
} } } }
9 (pre-selected fax
51