Table of Contents
Advertisement
How to set up
{RECEIVE MODE}
{+}{-}
1
Set the fax machine to FAX ONLY mode by
{ { { {
pressing
RECEIVE MODE
following is displayed.
FAX ONLY MODE
3 RINGS
L
The display will show the number of
rings before the fax machine answers a
call in FAX ONLY mode.
2
{ { { { + + + + } } } }
{ { { { - - - - } } } }
Press
or
setting to 5 and press
3
Turn on your answering machine.
4
Adjust a ring setting of the answering
machine less than 4.
L
This will allow the answering machine to
answer the call first.
{SET}
{FAX/START}
} } } }
until the
FAX
TEL
to change the ring
{ { { {
} } } }
SET
.
For Fax Advantage assistance, call 1-800-435-7329.
Connections and Setup
How to receive calls
At first your answering machine will pick up the
call.
L
If the call is a phone call, the answering
machine will record voice message
automatically.
L
If a fax calling tone is detected, the answering
machine will be disconnected and the call will
be switched to the fax machine. The fax
machine will receive a fax automatically.
If the answering machine is turned off
The fax machine will ring 5 times and receive a
fax automatically.
With the fax machine
1. When the fax machine rings, lift the handset
of the fax machine.
2. When document reception is required, a fax
calling tone (slow beep) is heard, or no sound
is heard, press
3. Replace the handset.
L
The fax machine will start reception.
With an extension telephone
1. When the extension telephone rings, lift the
handset of the extension telephone.
2. When document reception is required, a fax
calling tone (slow beep) is heard, or no sound
is heard, press
activation code) firmly.
3. Replace the handset.
L
The fax machine will start reception.
Note:
L
You can change the fax activation code in
feature #41 (page 62).
{ { { {
} } } }
FAX/START
.
{ { { { * * * * } } } } { { { { # # # # } } } } { { { {
} } } }
9
(pre-selected fax
17
Hide quick links:
Advertisement
Table of Contents
