Pc Interface On/Off - Oki OKIFAX 740 User Manual

PC Interface On/Off

Your OKIFAX 740 is equipped with a serial interface for
connection to a serial 'COM' port on a PC.
This facility enables a PC running a fax program, such as
WinFax Pro or LaserFax, to send and receive fax messages
without the need for intermediate printing.
In order to use this facility you must first set the PC Interface
function to ON. If you wish to discontinue using this
facility, you must set the PC Interface function to OFF.
PC I/F MODE? Y/N
1. To turn this mode ON or OFF, press
IF: ON=* OFF-#
The current setting, ON or OFF, will flash.
2. Press to turn this facility ON, or
[*]
3. Press [YES] to confirm your choice and return the
machine to standby.
Note: When an incoming or outgoing fax message is in
.
[YES]
to turn it OFF.
[#]
progress via the PC Interface, all buttons except
are disabled. To halt the progress of a fax transaction
in this mode, press on the fax machine, or select
[STOP]
the STOP function within your PC fax program.
[STOP]
55