Crystal-M Imager | Controlling the printer via a remote PC (with browser) | 93
Starting the remote session
To start the remote session, enter the printer IP address in the Address bar of
the browser.
The Browser welcome page appears:
There are five access levels: Operator, Key-operator, Service Engineer,
Specialist and Security (also know as administrator). Each level has its own
user name and password.
Note: When starting the remote session, make sure the printer is
in 'Ready' mode.
Note:
A remote session disables the local keypad and display. While
you work remotely, the following screen is displayed:
3853B EN 20210520 0952