Table of Contents
Advertisement
Using the installation wizard
When you install the printer, the installation wizard will guide you through
the complete installation procedure.
Topics:
•
Starting the installation wizard
•
Entering the printer network settings
•
Entering modality specific settings
•
Saving the configuration
Starting the installation wizard
1. Press the Key-operator key to enter the Key-operator mode.
2. On the Key-operator main menu, press the Down key eight times, followed
by the Confirm key to select 'Installation'.
The 'Installation' screen will be displayed:
3. Press the down key, followed by the Confirm key to select 'Printer
installation'.
The 'Language' screen is displayed with the available languages. For
example:
Select language:
1*English
2 Nederlands
3 Deutsch
The currently active language is marked with a '*' on the left.
4. Press the up/down arrow keys to select the desired language.
5. Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
The 'Date' screen is displayed:
Crystal-M Imager | Advanced Operation (key-operator mode) | 73
Note: Although the Installation wizard consists of three separate
steps, these steps cannot be performed separately
Note: The number of displayed languages depends on the
installed dataset.
3853B EN 20210520 0952
Advertisement
Table of Contents
