Accessing The Save Configuration Menu - AGFA Crystal-M Imager Reference Manual

50 | Crystal-M Imager | Advanced Operation (key-operator mode)

Accessing the save configuration menu

1. Press the Key-operator key to enter the Key-operator mode.
2. On the Key-operator main menu, press the Down key three times, followed
by the Confirm key to select 'Save configuration'.
The 'Save configuration' screen appears:
3. Press the Escape key to return to the Key-operator main menu.
4. Press the Escape key to quit the Key-operator mode.
3853B EN 20210520 0952