returned to the higher level menu. If you press this key on a data screen after
entering information, all changes on that screen are lost.
If the Key-operator does not interact with the menu for a longer period (ten
minutes or more), the menu will time-out and revert back to the ready state.
The Key-operator will receive a warning that the time-out is about to expire:
Press the Confirm key to return to the Key-operator menu. Otherwise, the
Keyoperator menu will be closed.
Related Links
Changing the site-specific data (via remote browser only)
Crystal-M Imager | Advanced Operation (key-operator mode) | 11
Note: The printer will sound a long beep if you press a key that is
not to be used at that moment.
on page 27
3853B EN 20210520 0952