Table of Contents
Advertisement
06/08 Rev. AA
QUICK REFERENCE
9864
Material parameters
The following three parameters are used to set the material properties:
Parameter
PRINT PARAMETER > material type
PRINT PARAMETER > material length
PRINT PARAMETER > material width
SYSTEM PARAMETER > light sens. type
[Tab. 1]
Important parameters for setting material properties
For more information on setting parameters, see "Operating the
parameter menu" in the topic section "Info printouts and parameters."
Function
Sets the material type (punched or
continuous)
Sets the material length
Sets the material width
Sets the sensor type (reflex or
transmission) based on the material
(marks or perforations)
12
Advertisement
Table of Contents
