M I G R A T I O N G U I D E
Use this guide to change your commands for the Monarch® Sierra Sport2™ 9460™ NP
printer to the Monarch® Sierra Sport2™ 9460™SNP printer. The print server is different
in the NP and SNP printers, so commands may vary slightly.
This guide lists the NP printer default settings, serial communication settings, and
console commands with their SNP equivalents (if applicable).
Information in this document supercedes information in previous versions. Check our Web
site (www.paxar.com) for the latest documentation and release information.
P r i n t e r D e f a u l t s
The following table lists the radio frequency (RF) defaults for the NP and the SNP
printers.
Function
SSID
Security
IP Addressing
Application Connectivity
Keep Alive Time
Connection Timeout
Power save mode on Radio Card
Console password
S e r i a l C o m m u n i c a t i o n s D e f a u l t s
The following table lists the direct serial communications defaults for the NP and the SNP
printers.
Function
Baud Rate
Parity
Data Bits
Stop Bits
Flow Control
Monarch®, Sierra Sport2, and 9460 are trademarks of Paxar Americas, Inc.
Paxar® is a trademark of Paxar Corporation.
Avery Dennison® is a trademark of Avery Dennison Corporation.
TC9460MG Rev AD 12/07
Default
search mode
disabled
DHCP
Raw data on Port 9100
1 minute
0 minutes
PSP Level 3
access
Default
19200
None
8
1
RTS/CTS
©2007 Paxar Americas, Inc. a subsidiary of Avery Dennison Corp.
All Rights Reserved.