Changing Material - Avery Dennison Monarch 9864 Quick Reference Manual

06/08 Rev. AA

Changing material

Follow these instructions to replace the
material roll.
The printer must be turned on;
otherwise, the printhead presses on the
material.
9864
1. Set the printer to offline mode and open
the cover.
2. To remove the material, press and hold the
opener while pulling the material back
towards the roll (Fig. 2).
9864 dispenser
1. Set the printer to offline mode and open
the cover.
2. Tear the backing paper off (2), pull out the
clip (Fig. 3) and remove the wound up
backing paper (Fig. 4).
3. Open the shutter (3) and pull out the
remaining backing paper towards the
dispensing edge.
4. To remove the material, press and hold the
opener while pulling the material back
towards the roll (Fig. 2).
You can also move the material
backwards by pressing the Online+Cut
keys while in offline mode.
QUICK REFERENCE
9864
1
2
3
9