Table of Contents
Advertisement
2.0 HDD Installation
This series of the product supports 4 SATA hard drives. Please make sure that the device is
powered off before the installation. The pictures of the installation are for reference only.
1.
2. Screw the screws into the HDD but do not tighten them.
3. Turn over the machine and place the HDD with two screws onto the bottom of the
4. Install the other three HDDs according to above-mentioned method.
5. Connect the power and data cables.
6. Install back the cover and secure it with the screws.
Note: Please check the inside structure of the device and make sure that the cables are
connected well before installing the cover back. Please format the HDD before using.
7
Loosen the screws to open the cover.
case. Then lock the screws according to the order of the marks.
Advertisement
Table of Contents
