Related Manuals for Genie WAHD8162
Summary of Contents for Genie WAHD8162
- Page 1 16 Channel 5-in-1 High Definition 8MP Hybrid DVR with 2 HDD Bays WAHD8162 Quick Start Guide Please read these instructions carefully before operating the unit and keep for further reference.
- Page 2 Intro Section Please read this instruction carefully before operating the product and keep it for further reference. All examples and pictures used here are for reference only. The contents of this manual are subject to change without notice. CAUTION: • Please check the device and the accessories after getting the device.
-
Page 3: Table Of Contents
Contents 1.0 Introduction ......................4 1.1 Product Features ...................4 1.2 Product Dimensions ..................4 1.3 Specification....................5 2.0 HDD Installation ....................6 3.0 Rear Panel Instruction ..................7 4.0 Start Up and Shut Down ..................8 5.0 Login ........................9 6.0 Configurations and Connections ................10 6.1 Ananlogue Camera Connection ..............10 6.2 Network Configuration &... -
Page 4: Introduction
1.0 Introduction The Genie WAHD8162 is a DVR that supports 16 channel 8MP, 5MP, 4MP, 3MP, 1080p, 720p and WD1 analogue and IP video input simultaneously. It adopts the standard H.265 high profile compression format and supports 16 channel video input, 1 channel audio input and simultaneous 16 channel playback. -
Page 5: Specification
Quick Start Guide 16 Channel 5-in-1 High Definition 8MP Hybrid DVR with 2 HDD Bays 1.3 Specification Model WAHD8162 System Embedded Linux BNC x16 Analogue Video Input BNC interface (1.0Vp-p, 75Ω) TVI / AHD / CVI : 4K @ 15fps, 5MP @ 20fps, 4MP / 3MP / 1080p / 720p / WD1 @ 30fps (Live) -
Page 6: Hdd Installation
2.0 HDD Installation This series of the product supports 2 SATA hard drives. Please make sure that the device is powered off before the installation. The pictures of the installation are only for reference. Loosen the screws to open the cover. 2. -
Page 7: Rear Panel Instruction
3.0 Rear Panel Instruction The interfaces of the rear panel are for reference only. Internet Name Description VIDEO IN Video input CVBS CVBS output AUDIO OUT Audio output AUDIO IN Audio input HDMI Connect to high definition display device Connect to monitor Network port Connect to USB storage devices or USB mouse RS485... -
Page 8: Start Up And Shut Down
4.0 Start Up and Shut Down Startup Connect the monitor and the power. 2. The device will boot and the power indicator will display blue. 3. A wizard window will pop up. Shutdown Click “Start” and then select “Shutdown” icon. This will bring up a shutdown window. The device will shut down by clicking “OK”... -
Page 9: Login
5.0 Login The default username is admin and the default password is 123456. You must configure the wizard if you start the DVR for the first time and you may change the password when you configure the wizard for the first time. You can skip the settings wizard next time. Click “Start”... -
Page 10: Configurations And Connections
6.0 Configurations and Connections 6.1 Ananlogue Camera Connection First connect the camera to the DVR. Then go to Start → Settings → Camera→ Manage Camera → Camera Signal to checkmark the video mode. Theactual signals input shall correspond to the video mode. Please refer to the User Manual for details. - Page 11 Quick Start Guide 16 Channel 5-in-1 High Definition 8MP Hybrid DVR with 2 HDD Bays 5. Checkmark the device you want to add and then click “Add” button.The DVR will automatically refresh the cameras and return to “Edit Camera” interface. “Online” status means connecting the device successfully and you will see the live image.
-
Page 12: Upnp
7.0 UPnP You can use the UPnP function to enable the fast connection of the device to WAN via a router without port mapping. Go to Start → Settings → Network → UPnP, and enable UPnP and then click “Apply” button to save. -
Page 13: Nat
8.0 NAT NAT Settings The DVR shall be powered on and connected to the network. 2. Go to Start → Settings → Network → TCP/IP. You can obtain the IP address, subnet mask and gateway automatically. You can also manually enter them according to the actual network situation. -
Page 14: Manual Recording And Playback
9.0 Manual Recording and Playback 9.1 Manual Recording Before recording, please install and format a HDD. In the live interface you can see the menu toolbar. Click button to start recording. Click it again to stop recording. You can also click to check the status of the recording. - Page 15 Sales +44(0)1707 330541 Enquiries sales@genieproducts.co.uk Website www.genieproducts.co.uk...