Related Manuals for Genie WNVR416P5OAI
Summary of Contents for Genie WNVR416P5OAI
- Page 1 PoE 16 Channel H.265 12MP NVR with 4HDD Bays, Facial Recognition and LPR WNVR416P5OAI Quick Start Guide Please read these instructions carefully before operating the unit and keep for further reference.
- Page 2 Intro Section Please read this instruction carefully before operating the product and keep it for further reference. All examples and pictures used here are for reference only. The contents of this manual are subject to change without notice. CAUTION: • Please check the device and the accessories after getting the device.
-
Page 3: Table Of Contents
Contents 1.0 Introduction ......................4 1.1 Product Features ...................4 1.2 Product Dimensions ..................4 1.3 Specification....................5 1.3 Specification....................6 2.0 HDD Installation ....................7 3.0 Rear Panel Instruction ..................8 4.0 Start Up and Shut Down ..................9 5.0 Login ........................10 6.0 Configurations and Connections ................11 6.1 Network Configuration &... -
Page 4: Introduction
1.0 Introduction The Genie WNVR416P5OAI is a 16 channel high definition 12MP network video recorder with 4HDD bays. The WNVR416P5OAI also supports face recognition when used in conjunction with any “Xpert” range of face recognition and LPR IP cameras. The WNVR416P5OAI features up to 16 channel simultaneous playback as well as 16 PoE network ports which supports direct connection from the IP camera to the NVR. -
Page 5: Specification
Quick Start Guide PoE 16 Channel H.265 12MP NVR with 4HDD Bays, Facial Recognition and LPR 1.3 Specification Model WNVR416P5OAI Embedded Linux System Mobile OS iOS, Android Compression H.265S/H.265+/H.265/H.264 IP Video Input 16CH IPC input Resolution 12MP/8MP/6MP/5MP/4MP/3MP/1080p / 1280×1024/960p/720p/960H/D1/CIF Video... -
Page 6: Specification
Quick Start Guide PoE 16 Channel H.265 12MP NVR with 4HDD Bays, Facial Recognition and LPR 1.3 Specification Model WNVR416P5OAI Interface RJ45 1000 Mbps × 2 RJ45 × 16 PoE Port (IEEE802.3at output power: ≤ 150W) Network TCP / IP, PPPoE, DHCP, DNS, DDNS, UPnP, NTP, SMTP, HTTP, HTTPs, 802.1x, RTSP, SNMP,... -
Page 7: Hdd Installation
2.0 HDD Installation This series of the product supports 4 SATA hard drives. Please make sure that the device is powered off before the installation. The pictures of the installation are for reference only. Loosen the screws to open the cover. 2. -
Page 8: Rear Panel Instruction
3.0 Rear Panel Instruction The interfaces of the rear panel are for reference only. Name Description PoE Ports PoE network ports, connect to PoE IP camera Network port Connect to monitor HDMI Connect to high definition display device Connect to USB storage device or USB mouse AUDIO OUT Audio output AUDIO IN... -
Page 9: Start Up And Shut Down
4.0 Start Up and Shut Down Startup Connect the monitor and the power. 2. The device will boot and the power indicator will display blue. 3. A wizard window will pop up. Shutdown Click “Start” and then select “Shutdown” icon. This will bring up a shutdown window. The device will shut down by clicking “OK”... -
Page 10: Login
5.0 Login The default username is admin and the default password is 123456. You must configure the wizard if you start the NVR for the first time and you may change the password when you configure the wizard for the first time. You can skip the settings wizard next time. Click “Start”... -
Page 11: Configurations And Connections
6.0 Configurations and Connections 6.1 Network Configuration & Adding IP Camera After you finish adding IP cameras, you can see the live images through the monitor of the NVR. The following will mainly introduce how to add the IP cameras via LAN/WAN. Set the network of the NVR. - Page 12 Quick Start Guide PoE 16 Channel H.265 12MP NVR with 4HDD Bays, Facial Recognition and LPR 5. Checkmark the device you want to add and then click “Add” button.The NVR will automatically refresh the cameras and return to “Edit Camera” interface. “Online” status means connecting the device successfully and you will see the live image.
-
Page 13: Upnp
7.0 UPnP You can use the UPnP function to enable the fast connection of the device to WAN via a router without port mapping. Go to Start → Settings → Network → UPnP, and enable UPnP and then click “Apply” button to save. -
Page 14: Nat
8.0 NAT NAT Settings The NVR shall be powered on and connected to the network. 2. Go to Start → Settings → Network → TCP/IP. You can obtain the IP address, subnet mask and gateway automatically. You can also manually enter them according to the actual network situation. -
Page 15: Manual Recording And Playback
9.0 Manual Recording and Playback 9.1 Manual Recording Before recording, please install and format a HDD. In the live interface you can see the menu toolbar. Click button to start recording. Click it again to stop recording. You can also click to check the status of the recording. - Page 16 Sales +44(0)1707 330541 Enquiries sales@genieproducts.co.uk Website www.genieproducts.co.uk...