Advertisement
3.0 Product Installation
Before you start, please make sure that the wall or ceiling is strong enough
to withstand 3x the weight of the camera. Please install the camera in the dry
environment.
1. Attach the drill template to the place where you want to fix the camera and
2. Remove the mounting base of the camera.
3. Route and connect the cables. Then secure the mounting base to the ceiling or
4. Install the dome and enclosure to the mounting base and then adjust the dome
5. Adjust the Focus and Zoom screw to get a clear image (if your camera is fixed
8
then drill screw holes according to the drill template.
Loosen the fixed screw to
disassemble the camera.
wall with the screws provided.
to obtain an optimum view angle.
lens or motorised lens, please skip this step).
Fixed Screw
Mounting bas e
Mounting Base
Enclosure
Dome
Rotate the mounting base and make sure the marks of
mounting base and enclosure are aligned. Then remove
the mounting base.
Cove r
Remove the mounting
base from here
Enclosure
Focu s
Zoom
Advertisement
