Advertisement
3.0 Product Installation
Before you start, please make sure that the wall or ceiling is strong enough
to withstand 3x the weight of the camera. Please install the camera in the dry
environment.
1. Attach the drill template to the place where you want to fix the camera and
2. Route and connect the cables.
3. Secure the mounting base with the camera to the wall with screws as shown
4. Bracket adjustment. Before adjustment, preview the image of the camera on a
5. Focus and zoom adjustment (If the model you get is fixed lens or motorised
8
then drill screw holes according to the drill template.
below.
monitor and then loosen the fixed ring or screws to adjust the view angle of the
camera.
Tilt 90°
lens, please skip this step). Remove the cover and then adjust the focus and
zoom levers to get a clear image. Finally, install the cover back.
Lens Cover
Fixed Ring
Pan 360°
Zoom
Focus
Fixed
Screws
Pan 360°
Tilt 90°
Rotation 360°
Cover
Focus
Zoom
Advertisement
