Related Manuals for Genie PWIP4EB
Summary of Contents for Genie PWIP4EB
- Page 1 4MP H.265 IP IR Eyeball Camera with 2.8mm Lens PWIP4EB | PWIP4EBG Quick Start Guide Please read these instructions carefully before operating the unit and keep for further reference.
- Page 2 Intro Section Please read this instruction carefully before operating the product and keep it for further reference. All examples and pictures used here are for reference only. The contents of this manual are subject to change without notice. CAUTION: • If the product does not work properly, please contact your dealer or the nearest service centre.
-
Page 3: Table Of Contents
Contents 1.0 Introduction ......................4 1.1 Product Features ...................4 1.2 Product Dimensions ..................4 1.3 Contents ......................4 1.4 Specification ....................5 2.0 Overview ......................6 3.0 Installation ......................7 4.0 Network Connection ...................8... -
Page 4: Introduction
1.0 Introduction The Genie PWIP4EB and PWIP4EBG are 4MP IP IR eyeball cameras with a 2.8mm lens. The cameras also feature up to 30m IR night view distance as well as being IP67. 1.1 Product Features • NDAA compliant •... -
Page 5: Specification
Quick Start Guide 4MP H.265 IP IR Eyeball Camera with 2.8mm Lens 1.4 Specification Image Sensor 1 / 2.7 “CMOS Image Size 2560 x 1440 Electronic Shutter 1 / 25 s ~ 1 / 100000 s Iris Type Fixed Iris 0.011 Lux @ F1.2, AGC ON, 0 Lux with IR, Minimum Illumination 0.04 Lux @ F2.26, AGC ON, 0 Lux with IR... -
Page 6: Overview
2.0 Overview Network Connector 4. Fixed Screw 2. Power Connector 5. Micro SD Card Slot* 3. Mounting Base 6. Reset* Note: Micro SD card slot and reset are optional. If no such interfaces, please skip these instructions. Security Cap DC12V •... -
Page 7: Installation
3.0 Installation Please make sure that the wall or ceiling is strong enough to withstand 3 times the weight of the camera. Please install the camera in and under a dry environment. Loosen the fixed screw to disassemble the camera. 2. -
Page 8: Network Connection
4.0 Network Connection In LAN, there are two ways to access the camera: Access Through IP-Tool 2. Direct Access Through Web Browser Access the Camera through the IP Tool Make sure that the camera and the PC are well connected via LAN. 2. - Page 9 Quick Start Guide 4MP H.265 IP IR Eyeball Camera with 2.8mm Lens Access the Web Browser The default network settings are as shown below: • IP address: 192.168.226.201 • HTTP:80 • Subnet Mask: 255.255.255.0 • Data Port:9008 • Gateway: 192.168.226.1 You may use the above default settings when you log in the camera for the first time.
- Page 10 Sales +44(0)1707 330541 Enquiries sales@genieproducts.co.uk Website www.genieproducts.co.uk...