Related Manuals for Genie GEB
Summary of Contents for Genie GEB
- Page 1 2MP 4-in-1 IR Eyeball Camera with 2.8mm Lens GEB | GEBG User Manual Please read these instructions carefully before operating the unit and keep for further reference.
- Page 2 Intro Section CAUTION: • To reduce the risk of electric shock, do not open the camera, please consult a professional or contact your distributor. • To prevent fire or shock hazards, the power, input voltage, current, voltage polarity and operating temperature of this camera must meet the requirements stated.
-
Page 3: Table Of Contents
Contents 1.0 Introduction ......................4 1.1 Product Features ...................4 1.2 Product Dimensions ..................4 1.3 Specification....................5 2.0 OSD Menu Tree ....................6 3.0 Product Installation....................7 3.1 Note ......................7 3.2 Installation Method ..................7 3.3 Product Connection ..................8 4.0 FAQ’s ........................9... -
Page 4: Introduction
1.0 Introduction The Genie GEB is a high definition discreet eyeball design camera with the latest 4-in-1 AHD, TVI, CVI and CVBS technologies (fully selectable). The camera utilises a 2.8mm fixed lens and with a 2MP 1080p resolution, providing a superb quality image suitable for most general applications both indoors and outdoors. -
Page 5: Specification
User Manual 2MP 4-in-1 IR Eyeball Camera with 2.8mm Lens 1.3 Specification Image Sensor 1/2.7” 2MP CMOS Image Size 1958 x 1105 Image System PAL / NTSC Resolution Electronic Shutter Auto Camera Synchronisation Internal synchronisation Minimum Illumination 0 Lux (IR On) Lens 2.8 mm S / N Ratio... -
Page 6: Osd Menu Tree
2.0 OSD Menu Tree... -
Page 7: Product Installation
3.0 Product Installation 3.1 Note 1. Make sure the unit is powered off before installation. 2. Check that the power supply voltage is consistent with the electric voltage to prevent damage to the device. 3. Do not use in an environment beyond the boundaries of the temperature, and maintain good ventilation to prevent the risk of fire or electric shock. -
Page 8: Product Connection
User Manual 2MP 4-in-1 IR Eyeball Camera with 2.8mm Lens 3.3 Product Connection... -
Page 9: Faq's
4.0 FAQ’s Q: No picture with power on A: It may result from abnormal power supply. Please check if the power supply voltage and its polarity are correct. Also you will need to confirm if the wire connections and monitors are normal. Q: Unclear image output A: It is caused by incomplete adjustment of the lens back focus. - Page 10 Sales +44(0)1707 330541 Enquiries sales@genieproducts.co.uk Website www.genieproducts.co.uk...