Removing And Attaching The Foot Holder - Janome Continental M17 Instruction Book

q
e
t
r
e
w
t

Removing and Attaching the Foot Holder

Remove the foot holder before using Professional grade
oot u er or
feed foot AD, Stitch regulator or the embroidery foot.
CAUTION:
Always make sure to press the lockout key to lockout
the machine before replacing the foot holder.
Removing the foot holder
Raise the needle by pressing the needle up/down button.
Press the lockout key and raise the presser foot with the
presser foot lifter.
q Needle up/down button
w Lockout key
e Presser foot lifter
Loosen the thumbscrew and remove the foot holder.
r Thumbscrew
t Foot holder
Attaching the foot holder
Attach the foot holder to the presser bar from the rear.
Lower the presser foot with the presser foot lifter.
y
Tighten the thumbscrew securely with the screwdriver.
y Presser bar
r
25
oot arning oot ua