Janome Continental M17 Instruction Book page 117

q
w
e
i o
y
Adjustment of tapered stitches
ou can adjust the shape o the tapered stitch pattern
ress the tapering adjustment e
The dialog box will open.
q Tapering adjustment e
Tapering shape
Select the shape of the tapering for the beginning and
the end of the stitch patterns by pressing the tapering
r
shape keys.
The keys on the top w are for start tapering pattern r.
The keys on the bottom e are for end tapering pattern t.
w Tapering shape keys (for start tapering pattern)
e Tapering shape keys (for end tapering pattern)
The numbers in the tapering shape keys indicate the
degree of tapering. You can apply the tapering alignment
from left, center, right or off. The start and end of the
stitch patterns can be aligned separately.
t
Pattern body length
The keys on the middle y are for pattern body length u.
The machine sews the pattern body as long as the auto-
lock key is pressed when the free length key i is turned
on. However, you can set the number of the pattern body
to be sewn by pressing the pattern length key o.
u Pattern body
i Free length key
u
o Pattern length key
115