Replacing The Presser Foot - Janome Continental M17 Instruction Book

z
q
x
e
c
r
v
w
u
y
t
24

Replacing the Presser Foot

CAUTION:
• Always make sure to press the lockout key before
replacing the presser foot.
• Use the proper foot for the selected pattern. The
wrong foot can cause the needle to break.
z Raise the needle by pressing the needle up/down
button.
Press the lockout key.
q Needle up/down button
w Lockout key
x Raise the presser foot lifter.
e Presser foot lifter
c Press the black lever on the back of the foot holder.
The presser foot will drop off.
r Lever
CAUTION:
To avoid damaging the lever, do not push it down.
v Place the presser foot so that the pin on the foot lies
just under the groo e o the oot ho der
Lower the presser bar to lock the foot in place.
t Pin
y Groove
ach oot is mar ed ith an identification etter
u dentification etter